 Oilfilter does not fit, See pics |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Frankvw |
 Sep 11 2016, 10:10 AM
Post
#1
|
|
working on my first 914 !  Group: Members Posts: 653 Joined: 13-April 16 From: Holland, the Netherlands Member No.: 19,896 Region Association: Europe  |
Hi all. I started working on my 914 and first thing was an oilchange and a new filter. Got all the parts new, and started working. How hard is an oilchange right?
All went fine untill I removed the old oilfilter...i thought a wrong one was there since it was another type then should be there, it was smaller in diameter. However... The new filter does not fit. It is too wide since it hits another part, a supportthing that hold a wheel that presses on the belt. See pics.  The new bosch filter is hitting this supportbracket. This is the new filter i think is ok  This filter came off. It is smaller in diameter and clears the supportbracket   Can you please advice? Can i get that smaller diameter oilfilter to continue ? |
   |
 
|
  |
Replies
| Frankvw |
Sep 14 2016, 01:02 PM
Post
#2
|
|
working on my first 914 ! Group: Members Posts: 653 Joined: 13-April 16 From: Holland, the Netherlands Member No.: 19,896 Region Association: Europe |
Ok...since a PH195 was not available in NL, I bought a MANN filter, which is compatible. It has a 'better' diameter for me, but is about an inch longer than teh PH195 that came off the engine.
I fits nice and does not stick out, is nicely tucked away even though it is a bit longer  as you can see the one recommended is shorter and has a bigger diameter, the other MANN filter is longer and has a smaller diameter. A small job, but one down from the list ! Thanks for the tips and advice ! |
|
|
|
Posts in this topic
Frankvw Oilfilter does not fit Sep 11 2016, 10:10 AM
bretth Is that little wheel a belt tensioner for an AC sy... Sep 11 2016, 10:26 AM RAX 914 This is the Bosch oil filter I just used:
Sep 11 2016, 10:30 AM Frankvw Sorry...it is a 1973 1.7 (forgot to mention that)
... Sep 11 2016, 10:41 AM RAX 914 I have a '72 1.7 and the Bosch 3402 fits well,... Sep 11 2016, 10:53 AM
Mueller
I have a '72 1.7 and the Bosch 3402 fits well... Sep 11 2016, 10:54 AM Mueller Just buy another smaller diameter filter, it obvio... Sep 11 2016, 10:53 AM Frankvw Mueller, "it obviously worked since the motor... Sep 11 2016, 11:08 AM Dion I use MAHLE OC-28.
I usually had probs with the l... Sep 11 2016, 12:27 PM tomeric914 Baldwin B228 is my favorite. Same length as the s... Sep 11 2016, 01:28 PM The Cabinetmaker
Baldwin B228 is my favorite. Same length as the ... Sep 11 2016, 02:05 PM tomeric914 Yes, that's a Baldwin B178 which hangs a bit t... Sep 11 2016, 03:36 PM Dave_Darling I would be tempted to get rid of the tensioner. T... Sep 11 2016, 06:01 PM Big Len I have used the K & N and Mobil 1 filters in a... Sep 11 2016, 06:34 PM JOEPROPER I would just get another ph195 and call it a day. Sep 11 2016, 07:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 12:27 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.