 Cylinders Stuck to Head |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| andrewvolsen |
 Sep 27 2016, 02:21 PM
Post
#1
|
|
Newbie  Group: Members Posts: 44 Joined: 6-December 09 From: Santa Barbara Member No.: 11,099 Region Association: Central California  |
When I pulled the heads off of a spare engine, three of the four cylinders stayed stuck to the head. I sprayed them with penetrating oil, waited a day, then beat on them with a hammer. Still stuck. Any ideas on how to get these unstuck (IMG:style_emoticons/default/confused24.gif)
Attached thumbnail(s) 
|
   |
 
|
  |
Replies
| Dave_Darling |
Sep 27 2016, 02:33 PM
Post
#2
|
|
914 Idiot Group: Members Posts: 14,991 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California 
|
Any hammering you do, make sure it is completely parallel to the fins. And that the face of the hammer is completely perpendicular to them. That gives you the best chance of not breaking them.
Or just use a block of wood, as Mark suggested. Still probably a good idea to hit that parallel to the fins, though. --DD |
|
|
|
Posts in this topic
andrewvolsen Cylinders Stuck to Head Sep 27 2016, 02:21 PM
euro911 Shoot some more PB in there and let it sit for ano... Sep 27 2016, 02:30 PM andrewvolsen Thanks for the input. I'll soak it for another... Sep 27 2016, 02:56 PM 6freak use a died blow mallet not a freak n ball penis ... Sep 27 2016, 03:29 PM
stugray
use a died blow mallet not a freak n ball penis... Sep 27 2016, 06:59 PM KELTY360
use a died blow mallet not a freak n ball peni... Sep 27 2016, 07:23 PM bretth I think I did this once by holding the cylinder ti... Sep 27 2016, 04:05 PM euro911 Hmmm :idea:
Not a bad idea ... Sep 27 2016, 06:40 PM injunmort i will get flamed for this, but here goes. take a ... Sep 27 2016, 08:41 PM theleschyouknow hey admins, y'all watchin this?
between all th... Sep 27 2016, 09:12 PM porschetub Heat , and a bit more heat,apply heat to the head ... Sep 28 2016, 01:10 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 12:17 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.