 Front turn signal works but not running light |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JPA914 |
 Oct 11 2016, 12:34 PM
Post
#1
|
|
Member  Group: Members Posts: 81 Joined: 30-June 15 From: Houston, TX Member No.: 18,905 Region Association: Southwest Region  |
Obviously not the bulb, as it's the same one handling both functions. This is for the driver's side BTW. The running light doesn't light up when pulling the headlight knob on the dash to either the first or second detent. Anyone have an idea what the problem might be?
|
   |
 
|
  |
Replies
| malcolm2 |
Oct 11 2016, 01:12 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,747 Joined: 31-May 11 From: Nashville Member No.: 13,139 Region Association: South East States 
|
Some bulbs have 2 filaments. Maybe one is burned out....
If not that then you might remove the bulb and put a VOM on the contacts in the bulb socket to see if power is there (in the right place) for both functions. That is the extent of my troubleshooting.... (IMG:style_emoticons/default/mellow.gif) |
|
|
|
| JPA914 |
Oct 11 2016, 02:06 PM
Post
#3
|
|
Member Group: Members Posts: 81 Joined: 30-June 15 From: Houston, TX Member No.: 18,905 Region Association: Southwest Region |
QUOTE(malcolm2 @ Oct 11 2016, 02:12 PM)  Some bulbs have 2 filaments. Maybe one is burned out.... If not that then you might remove the bulb and put a VOM on the contacts in the bulb socket to see if power is there (in the right place) for both functions. That is the extent of my troubleshooting.... (IMG:style_emoticons/default/mellow.gif) Thank you for the reply. I switched the bulbs between sides and the problem stayed on the same side, so I think the bulb is OK. Good idea on using a meter to test the functions, I'll try that. |
|
|
|
Posts in this topic
JPA914 Front turn signal works but not running light Oct 11 2016, 12:34 PM
toolguy Does the WART light on that side work?
It's t... Oct 11 2016, 02:12 PM
JPA914
Does the WART light on that side work?
It's ... Oct 11 2016, 02:14 PM toolguy probably the contactor under the bulb if the bulb ... Oct 11 2016, 03:42 PM JPA914
probably the contactor under the bulb if the bulb... Oct 11 2016, 04:54 PM jkb944t The spade is riveted to the light assembly but the... Oct 12 2016, 07:43 PM jkb944t The spade is riveted to the light assembly but the... Oct 12 2016, 07:43 PM JPA914
The spade is riveted to the light assembly but th... Oct 12 2016, 09:34 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2025 - 11:28 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.