 Front turn signal works but not running light |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JPA914 |
 Oct 11 2016, 12:34 PM
Post
#1
|
|
Member  Group: Members Posts: 81 Joined: 30-June 15 From: Houston, TX Member No.: 18,905 Region Association: Southwest Region  |
Obviously not the bulb, as it's the same one handling both functions. This is for the driver's side BTW. The running light doesn't light up when pulling the headlight knob on the dash to either the first or second detent. Anyone have an idea what the problem might be?
|
   |
 
|
  |
Replies
| toolguy |
Oct 11 2016, 03:42 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,275 Joined: 2-April 11 From: San Diego / El Cajon Member No.: 12,889 Region Association: Southern California 
|
probably the contactor under the bulb if the bulb is know to be good. . or the wire lead is loose off the spade under the rubber cover.
Look inside socket for corrosion, and make sure it is high enough to touch bulb base. . The brass tab can be bent upwards a tad bit. |
|
|
|
Posts in this topic
JPA914 Front turn signal works but not running light Oct 11 2016, 12:34 PM
malcolm2 Some bulbs have 2 filaments. Maybe one is burned ... Oct 11 2016, 01:12 PM
JPA914
Some bulbs have 2 filaments. Maybe one is burned... Oct 11 2016, 02:06 PM toolguy Does the WART light on that side work?
It's t... Oct 11 2016, 02:12 PM JPA914
Does the WART light on that side work?
It's ... Oct 11 2016, 02:14 PM JPA914
probably the contactor under the bulb if the bulb... Oct 11 2016, 04:54 PM jkb944t The spade is riveted to the light assembly but the... Oct 12 2016, 07:43 PM jkb944t The spade is riveted to the light assembly but the... Oct 12 2016, 07:43 PM JPA914
The spade is riveted to the light assembly but th... Oct 12 2016, 09:34 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2025 - 11:26 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.