 Six conversion w/ 2.7 engine, Questions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| thomasotten |
 Dec 1 2016, 07:38 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,565 Joined: 16-November 03 From: San Antonio, Texas Member No.: 1,349  |
I am curious as to what kind of oil cooler setup is required or recommended
when installing a stock 74-77 2.7 911 engine. Use stock t-stat control valve, stock cooler? Any past experience would be appreciated. |
   |
 
|
  |
Replies
| porschetub |
Dec 2 2016, 11:56 AM
Post
#2
|
|
Advanced Member Group: Members Posts: 4,817 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
Interesting reading,many without additional coolers and no problems, these are real world examples ,a lot would depend on the ambient temp and the RPM range the car is driven in,I'am still learning to drive mine but I find that driving a gear lower keeps the engine more "on the boil" the motor I have is hardly what you would call torquey.
Had a spirited drive yesterday back from my friends shop after some tidy up work on the motor,fairly hot day and mostly 180 on the flat road with the temp going to 185 on the hilly twisties. Then there the issue of me learning to drive a lefthand drive car on our roads but that's another story....... |
|
|
|
Posts in this topic
thomasotten Six conversion w/ 2.7 engine Dec 1 2016, 07:38 AM
Steve
I am curious as to what kind of oil cooler setup ... Dec 1 2016, 09:17 AM db9146 Do a search for Mike Fitton here. I believe he ha... Dec 1 2016, 09:33 AM
Mike Fitton
Do a search for Mike Fitton here. I believe he h... Dec 1 2016, 10:24 AM mountainroads This question comes up occasionally, and I pay att... Dec 1 2016, 10:10 AM mb911 My 2.7 ran got until I put a front oil cooler in. ... Dec 1 2016, 10:16 AM wndsrfr
I am curious as to what kind of oil cooler setup ... Dec 1 2016, 12:33 PM porschetub There are other factors to consider,is the motor c... Dec 1 2016, 12:42 PM 6freak yeah its not a problem until it is ..lotta good po... Dec 1 2016, 12:57 PM Steve Depends where you live. I did not have problems o... Dec 1 2016, 02:47 PM GeorgeRud I've been running a hot-rod 2.7 in my 914-6 co... Dec 1 2016, 03:16 PM billh1963 I have a 2.7 in a '72 914. The car is only dri... Dec 1 2016, 05:08 PM patssle I have a 3.0L and tried to get away without a 2nd ... Dec 1 2016, 06:47 PM rudedude Mine never gets over 230 in hot weather. Has a sma... Dec 1 2016, 08:17 PM 6freak
Mine never gets over 230 in hot weather. Has a sm... Dec 2 2016, 10:48 AM wndsnd My 2.7 only hit 220 a couple of times mid-summer o... Dec 2 2016, 10:56 AM Larmo63 My 2.7 build is getting a Patrick/Setrab cooler.
... Dec 2 2016, 11:05 AM CMONNETT Thomas,
You will need an additional cooler where ... Dec 2 2016, 11:11 AM JmuRiz I'm going to try the setrab with dual fans und... Dec 2 2016, 12:05 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 11:04 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.