![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
ws6 |
![]()
Post
#1
|
Newbie ![]() Group: Members Posts: 5 Joined: 25-October 16 From: california Member No.: 20,526 Region Association: Central California ![]() |
Help. I have gotten three voltage regulators from the normal Porsche Parts suppliers and none fit. The distance from edge of case to the first spade is .25 inches on my original regulator. The catalogs all show same regulator for 911, 914, and 914-6. The ones I have received vary from .4 from the edge to .65 from the edge all with same PN so will not fit in area to plug into. Anyone know the actual part to buy? My original has numbers on it in this order 0 190 601 006 AD 1/14V. The replacements show up as PN 901 603 206 02 Yes I can rewire, or maybe take both apart and move the guts, but trying to keep original and not have a wire harness to convert to get wires to new regulator. Thank you for your help. Tim
![]() |
![]() ![]() |
porschetub |
![]()
Post
#2
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,816 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None ![]() |
The Pelican Chinese made Hella sorta fits,pins are right but mounting holes are wrong......how long they last who knows?
|
ws6 |
![]()
Post
#3
|
Newbie ![]() Group: Members Posts: 5 Joined: 25-October 16 From: california Member No.: 20,526 Region Association: Central California ![]() |
|
porschetub |
![]()
Post
#4
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,816 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None ![]() |
The Pelican Chinese made Hella sorta fits,pins are right but mounting holes are wrong......how long they last who knows? I purchased one of those too, pin location was off .15 inch so would not fit in location. My relay board cover wouldn't fit properly also,don't think the pelican one was intented for the 914 (IMG:style_emoticons/default/sad.gif) . |
brant |
![]()
Post
#5
|
914 Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 11,949 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains ![]() ![]() ![]() |
The Pelican Chinese made Hella sorta fits,pins are right but mounting holes are wrong......how long they last who knows? I purchased one of those too, pin location was off .15 inch so would not fit in location. My relay board cover wouldn't fit properly also,don't think the pelican one was intented for the 914 (IMG:style_emoticons/default/sad.gif) . my experience also |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 07:51 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |