 5 lug 911 brake disk bolts |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tazz9924 |
 Feb 22 2017, 05:24 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 755 Joined: 31-May 15 From: Mooresville NC Member No.: 18,779 Region Association: None  |
When i bought my 911 hubs they didn't come with bolts to mount the rotors. Are there certain bolts i have to use for the brake rotors ie factory ones, or could i use some grade 8 bolts/ metric equivalents. If its factory or nothin does anyone have a set their willing to part with?
|
   |
 
|
  |
Replies
| mepstein |
Feb 22 2017, 05:46 PM
Post
#2
|
|
914-6 GT in waiting Group: Members Posts: 20,587 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region 
|
Whatever fits. They just hold in place. The lug bolts are what secure the rotor.
|
 |
|
| eeyore |
Feb 22 2017, 06:23 PM
Post
#3
|
|
Senior Member Group: Members Posts: 889 Joined: 8-January 04 From: meridian, id Member No.: 1,533 Region Association: None |
QUOTE(mepstein @ Feb 22 2017, 04:46 PM)  Whatever fits. They just hold in place. The lug bolts are what secure the rotor. Nay. On the front, the rotor bolts to the inside, the rim to the outside of the hub. The metric equivalent of Grade 8 is 10.9. But 8.8 is rated at 100,000 PSI, so that might be good enough. A bag of 25 M8x1.25 x22mm is 6 bucks from McMaster.com M8x1.25 |
|
|
|
| mepstein |
Feb 22 2017, 06:41 PM
Post
#4
|
|
914-6 GT in waiting Group: Members Posts: 20,587 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region
|
QUOTE(Mark Garriott @ Feb 22 2017, 07:23 PM) QUOTE(mepstein @ Feb 22 2017, 04:46 PM) Whatever fits. They just hold in place. The lug bolts are what secure the rotor. Nay. On the front, the rotor bolts to the inside, the rim to the outside of the hub. The metric equivalent of Grade 8 is 10.9. But 8.8 is rated at 100,000 PSI, so that might be good enough. A bag of 25 M8x1.25 x22mm is 6 bucks from McMaster.com M8x1.25 Yes, I was just thinking rear hubs. |
|
|
|
Posts in this topic
tazz9924 5 lug 911 brake disk bolts Feb 22 2017, 05:24 PM
914Sixer PET shows M8x22mm with wave washers and nuts. Does... Feb 22 2017, 06:09 PM
tazz9924 Thanks guys! Feb 22 2017, 07:45 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 01:30 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.