![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
raynekat |
![]()
Post
#1
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,169 Joined: 30-December 14 From: Coeur d'Alene, Idaho Member No.: 18,263 Region Association: Pacific Northwest ![]() ![]() |
Sorting through some of the bolts I had re-plated that weren't documented too well on my 914-6 conversion.
Some of these might be 914-4 parts only? ![]() From the top down.... 1st pair are (2) M12x125 bolts 2nd pair down are (2) M10x110 bolts with one have a special half moon head (starter bolt?) 3rd pair down are (2) M12x80 bolts 4th pair down are (2) M10x55 bolts with a funny locking feature at the end of the threads 5th pair down are (2) M10x90 socket (allen) head bolts last pair are (2) M10x50 socket (allen) head bolts Any help identifying some of these would be greatly appreciated. Have a great Fourth! |
![]() ![]() |
worn |
![]()
Post
#2
|
Winner of the Utah Twisted Joint Award ![]() ![]() ![]() ![]() Group: Members Posts: 3,492 Joined: 3-June 11 From: Madison, WI Member No.: 13,152 Region Association: Upper MidWest ![]() ![]() |
Sorting through some of the bolts I had re-plated that weren't documented too well on my 914-6 conversion. Some of these might be 914-4 parts only? ![]() From the top down.... 1st pair are (2) M12x125 bolts 2nd pair down are (2) M10x110 bolts with one have a special half moon head (starter bolt?) 3rd pair down are (2) M12x80 bolts 4th pair down are (2) M10x55 bolts with a funny locking feature at the end of the threads 5th pair down are (2) M10x90 socket (allen) head bolts last pair are (2) M10x50 socket (allen) head bolts Any help identifying some of these would be greatly appreciated. Have a great Fourth! They look a lot like the collection I had as the 6 conversion progressed. I want to say the allen heads are for suspension, and the big ones on the left are for tranny mounts. But I am not very certain. I suspect you will need them unless you are ridding yourself of more than the motor. I found I had duplicates because I bought a 911 front suspension with steering rack. So some of the bolts I took off the car were replaced by the same parts from the 911. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 20th July 2025 - 07:39 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |