silicone hydraulic fluid, why not DOT5 silicone? Options

[worn]

We run silicone brake fluid in our LBCs (Little British Cars) and this is widely accepted among that crowd. This week I am putting new front wheel cylinders in the 47 Dodge P.U. truck cause we don't run it enough and they pitted.

So why not use the silicone fluid in a 914? Yes, there is a slight compression you can feel in the pedal, but in my TR6 you can hardly feel it. I now have enough toys so that routine maintenance is a pretty big chore. Keeping up with batteries and tires is bad enough. Yes, I know that you should bleed out the old fluid, but frankly I doubt that would have helped me with the truck. The problem was the lack of movement of the seals over the cylinder. My time flies!

So - what do you think?

Thanks,
Warren

[GregAmy]

DOT 4 is fine for any applications, even racing. And in my experience DOT 5 creates a funky pedal, and that was after running multiple cans through the system. And it costs more.

There's just no value in DOT 5. I run ATE Blue (while I still have some) and Amber/Gold in everything, street and race.