Electrical installation questions, Various issues under one thread Options

[JFG]

I'm now in a position to test the electricals on my car. It came with many things missing & broken.

I'm running twin carbs so there'll be no injection specific issues with electrics.

To start I have the following;

Wiring up the reverse light switch. I have used separate bullet connectors (part of the missing category) but I don't know if there is a right/wrong way to insert them. For example, is there a way to look on the switch to see which is live/earth?

There are 2 gauges where the lights don't illuminate. The rev counter and the multi gauge. The Speedo lights up fine. Bulbs and sockets are all new.

When I turn the ignition on the passenger side headlight opens up halfway, does not illuminate until I pull the light switch and does not raise or lower from this position.

Finally (for now) I only have one movement on the wiper switch. This came with the ignition cowl as a once piece lot.

I'll post some pictures shortly.

[JFG]

http://www.914world.com/bbs2/index.php?sho...=230879&hl=

Looking at the diagram in post no.4 it shows yellow on top??