GB -6 mufflers in stainless |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
GB -6 mufflers in stainless |
mb911 |
Aug 8 2017, 07:37 PM
Post
#1
|
914 Guru Group: Members Posts: 6,900 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest |
So after all of the testing we have good feed back. The mufflers are quiet as stock and flow a bit better over stock as larger id tubing internally. We still have to tweak the tail pipe locations and may ask for a little assistance with that. I am going to offer 10 of them at 650 for intro pricing and then 900 after that. They will be made 100% of 304 stainless weighs 18lbs, 2.5 dia tail pipe, installation kit will be included, shipping will be extra and to be determined.
Cairo94507(Michael) is 1st on the list so 1 more spot.(deposit ) 914forme (Stephen) Steve ( aka steve;)( deposit) Live free +drive (jon) (deposit) Rktmn247 (kent) (deposit) MEpstein(Mark) doesn't count for group buy Restore2seater (Pat)(deposit) Dion Marv E Mark Howard. Jmuriz (Nathan) Deposits will be 300. I will post pictures as we progress just as I did with the heat exchangers project with delivery in November.. Please let me know if you have any questions. |
live free & drive |
Nov 3 2017, 11:56 AM
Post
#2
|
Member Group: Members Posts: 159 Joined: 29-June 16 From: New Hampshire Member No.: 20,159 Region Association: None |
Would it be possible to have added 1 1/2" to 2" to the inlet pipes for people (like me, among others) who are running a 915 trans?
Maybe for an upcharge you could provide the modification vs. having to insert/create spacers? I'm working on a 3.2 with a 915 and your HE's - I have a Vellios tail-cone, but currently have installed a stock tail-cone (with reduced features) and the PMS steel adapter frame. From my measurements the Vellios tail-cone is about 3/4" shorter than the stock tail-cone casting (measured including nothing beyond the casting surface) so I'm assuming it's going to interfere with the muffler. |
mb911 |
Nov 4 2017, 07:09 AM
Post
#3
|
914 Guru Group: Members Posts: 6,900 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest |
Would it be possible to have added 1 1/2" to 2" to the inlet pipes for people (like me, among others) who are running a 915 trans? Maybe for an upcharge you could provide the modification vs. having to insert/create spacers? I'm working on a 3.2 with a 915 and your HE's - I have a Vellios tail-cone, but currently have installed a stock tail-cone (with reduced features) and the PMS steel adapter frame. From my measurements the Vellios tail-cone is about 3/4" shorter than the stock tail-cone casting (measured including nothing beyond the casting surface) so I'm assuming it's going to interfere with the muffler. Its possible.. The problem is that almost every order I had on the group buy wanted something special or custom and it makes very hard to break even on the project when I finish everything up.. That said its possible on this to do the upcharge as you describe. |
Steve |
Nov 4 2017, 10:32 AM
Post
#4
|
914 Guru Group: Members Posts: 5,619 Joined: 14-June 03 From: Orange County, CA Member No.: 822 Region Association: Southern California |
Would it be possible to have added 1 1/2" to 2" to the inlet pipes for people (like me, among others) who are running a 915 trans? Maybe for an upcharge you could provide the modification vs. having to insert/create spacers? I'm working on a 3.2 with a 915 and your HE's - I have a Vellios tail-cone, but currently have installed a stock tail-cone (with reduced features) and the PMS steel adapter frame. From my measurements the Vellios tail-cone is about 3/4" shorter than the stock tail-cone casting (measured including nothing beyond the casting surface) so I'm assuming it's going to interfere with the muffler. Its possible.. The problem is that almost every order I had on the group buy wanted something special or custom and it makes very hard to break even on the project when I finish everything up.. That said its possible on this to do the upcharge as you describe. 2” would be awesome. Maybe standardize on a 915 version and make a bunch of them. |
Lo-Fi Version | Time is now: 15th June 2024 - 04:21 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |