![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
URY914 |
![]() ![]()
Post
#1
|
I built the lightest 914 in the history of mankind. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 121,106 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None ![]() |
I'm done for a few months so the car will assume its position on jack stands.
I plan on: 1. Pulling the engine 2. Adding bars to tie the shock towers to the main hoop. 3. Cutting the firewall out. 4. Cutting the passenger side floor out. 5. Replacing the targa bar with f/g. 6. Replacing the remaining steel in the rear quaterpanels with f/g. 7. Cut off the jack recievers 8. Cut out the sheet metal between the shock towers. 9. Clean up the fit of the body panels. What's everyone use got planned? If you post what you're going to do, we'll come back in 2-3 months and check everyones progress. Paul |
![]() ![]() |
drew365 |
![]()
Post
#2
|
These are the good old days! ![]() ![]() ![]() ![]() Group: Members Posts: 2,004 Joined: 29-December 02 From: Sunny So. Cal. Member No.: 37 ![]() |
No jackstands yet, we have one more event at Buttonwillow Dec. 4.
Paul; we connected the roll cage to the shock towers at all four corners with triangulation, then connected the rear shock towers to the trans mounts in the rear trunk, and connected that rear beam to the suspension ear under the car. I don't have pictures but if you're interested I'll take some. What are you going to do after you cut out the firewall? |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 16th June 2024 - 04:49 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |