 Best write-up for front wheel bearings, Write up |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| simonjb |
 Feb 4 2018, 02:45 PM
Post
#1
|
|
KiwiMan  Group: Members Posts: 563 Joined: 18-October 16 From: Stamford, Connecticut Member No.: 20,505 Region Association: North East States 
 |
Can someone let me know whats a good article on replacing the front wheel bearings? I've got it all apart - now for the re-build. Thanks
|
   |
 
|
  |
Replies
| simonjb |
Feb 4 2018, 07:47 PM
Post
#2
|
|
KiwiMan Group: Members Posts: 563 Joined: 18-October 16 From: Stamford, Connecticut Member No.: 20,505 Region Association: North East States
|
Thanks guys. I had a real hard time getting the old inner bearing off the spindle. Its stayed on and I had to use a cold chisel to get it off. I hope getting the new one back on won't be too hard.
I will seat the inner bearing inside the rotor (bearings in freezer and will heat the rotor) put the sealing washer on, and then fit the rotor onto the spindle. Is there any trick or method to get the rotor to then seat all the way in on the spindle? Do you just push the rotor towards the center of the car? |
|
|
|
Posts in this topic
simonjb Best write-up for front wheel bearings Feb 4 2018, 02:45 PM
mepstein reverse the steps.
:lol: Feb 4 2018, 02:56 PM r_towle Grease them up, then reverse what you did Feb 4 2018, 03:19 PM simonjb Thats funny... Im trying to understand the bearing... Feb 4 2018, 04:35 PM r_towle Honestly, they will only fit one way, big one clos... Feb 4 2018, 04:49 PM r_towle Rubber dust and grease seal——-inner bearing—... Feb 4 2018, 04:51 PM mepstein https://m.youtube.com/watch?v=qC56kj5Lkq0 Feb 4 2018, 04:53 PM
JawjaPorsche You shouldn’t have to freeze the bearing. They ... Feb 4 2018, 08:16 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th June 2024 - 08:10 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.