 D-Jet Distributor Condenser Work Around, New Parts From Bosch Too Short. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914Sixer |
 Apr 26 2018, 05:13 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 8,912 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region 
 |
When I was gathering parts to rebuild the two distributors I have, I found the new Bosch condensers with the correct numbers were to short. I did find some NOS ones that were long enough. I knew that there must be a better solution, besides I did not like the way the wire came all the way across the distributor. I kept looking at Bosch condensers until this one popped up. It is designed for the 912 distributor. There are two versions one with the square hole and the round hole. Only the round hole will work. Since then I have found a couple more versions that will work also. You can make a custom fitted wire from the distributor to the coil. I like the cleaner look. Pictures show NOS factory setup first then the revised version.
Attached image(s)    
|
   |
 
|
  |
Replies
| 914Sixer |
Apr 26 2018, 07:35 PM
Post
#2
|
|
914 Guru Group: Members Posts: 8,912 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region
|
I get a 0 on checking that fact.
|
|
|
|
| 914sgofast2 |
Apr 26 2018, 07:46 PM
Post
#3
|
|
Senior Member Group: Members Posts: 627 Joined: 10-May 13 From: El Dorado Hills, CA Member No.: 15,855 Region Association: None |
QUOTE(914Sixer @ Apr 26 2018, 06:35 PM)  I get a 0 on checking that fact. I had that interference problem when I tried to mount it on the clip in front of the hole. |
|
|
|
Posts in this topic
914Sixer D-Jet Distributor Condenser Work Around Apr 26 2018, 05:13 PM
worn Very interesting, but not sure I understand the so... Apr 26 2018, 05:40 PM 914Sixer Condenser is moved from being mounted over on the ... Apr 26 2018, 06:44 PM Marty Yeoman Looks cleaner, but doesn't the condenser now i... Apr 26 2018, 07:01 PM
Mblizzard I may have a box full of NOS condenses and such if... Apr 27 2018, 12:08 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 11:25 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.