![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
Mueller |
![]()
Post
#1
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
If you have a Boxster or a 996 you can buy stainless headers for $100.
However they want $800 for these puppies for our 914's. They could have at least copied the better 2.0 HE's instead. Fire that marketing guy. ![]() |
![]() ![]() |
porschetub |
![]()
Post
#2
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,708 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None ![]() |
Ha ha me too ,looks like they had lots of scrap pipe ? ,jeez someone give the guy a bender ,really nothing tuned length there...square port for 914???.
Ben where are you ?,you need to check them out. Appears the Chinese stuff has fitment issues,yes the welds look nice but a mate was doing a 16v conversion on a mk1 Golf and said the same about the welding and I pointed out a great deal of the bends were "fusion" welded,only filler welds were on the manifold plate and the 4 way connector,and guess what it didn't fit. |
mb911 |
![]()
Post
#3
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,904 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest ![]() ![]() |
Ha ha me too ,looks like they had lots of scrap pipe ? ,jeez someone give the guy a bender ,really nothing tuned length there...square port for 914???. Ben where are you ?,you need to check them out. Appears the Chinese stuff has fitment issues,yes the welds look nice but a mate was doing a 16v conversion on a mk1 Golf and said the same about the welding and I pointed out a great deal of the bends were "fusion" welded,only filler welds were on the manifold plate and the 4 way connector,and guess what it didn't fit. Ugh.. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 17th June 2024 - 05:55 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |