 -AN Fuel tank fittings |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| GrayMatter |
  May 22 2018, 11:30 PM
Post
#1
|
|
Newbie  Group: Members Posts: 43 Joined: 10-August 05 From: So. Cal. Member No.: 4,570  |
I did a quick search and came up empty. Has anyone tried these? I’m wondering if they will fit our fuel tanks.
http://www.dansperformanceparts.com/sand/s...ing-to-6an.html |
   |
 
|
  |
Replies
| McMark |
May 23 2018, 06:12 AM
Post
#2
|
|
914 Freak! Group: Retired Admin Posts: 20,180 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None |
I did a little looking around. The tank fitting is M18x1.0 and the VW stuff appears to be the same -- although my research was hardly exhaustive on the VW side. There's a lot of year variations, so some could be different thread.
But I think those are the right ones. Use Loctite 565 to seal the threads, and let it cure for at least 24h before allowing fuel to come in contact. Don't use any type of rubber oring or washer. |
|
|
|
Posts in this topic
GrayMatter -AN Fuel tank fittings May 22 2018, 11:30 PM
Mark Henry I'd have to check but I think the VW bug fitti... May 23 2018, 05:01 AM Mark Henry The one issue I have, even if it fits, is the stoc... May 23 2018, 06:24 AM bdstone914 You can tap the inside of the fuel tank fitting to... May 23 2018, 07:33 AM
GrayMatter
You can tap the inside of the fuel tank fitting t... May 23 2018, 08:33 AM
Phoenix-MN
You can tap the inside of the fuel tank fitting t... May 23 2018, 01:34 PM theer My "Grey Matter" project will have -AN f... May 23 2018, 07:47 AM GrayMatter
My "Grey Matter" project will have -AN ... May 23 2018, 08:12 AM cary I have a pair of these on my car .............
htt... May 23 2018, 08:01 AM GrayMatter
I have a pair of these on my car .............
ht... May 23 2018, 08:15 AM GrayMatter I had thought about the screen. Any reason why I c... May 23 2018, 08:10 AM effutuo101 I had steel AN bungs welded to the fuel tank. I am... May 23 2018, 08:49 AM McMark The one issue I have, even if it fits, is the stoc... May 23 2018, 10:19 AM jd74914
McMark - you mention don’t use a washer? Not su... May 23 2018, 01:46 PM McMark I might not be understanding what you're refer... May 24 2018, 04:05 PM jim912928 here is a link on how I plumbed my six conversion.... May 24 2018, 10:39 AM Mike Bellis I have the CB version on mine and they work great. May 24 2018, 02:15 PM Mike Bellis I use an annealed copper washer with the CB fittin... May 24 2018, 04:25 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2025 - 03:09 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.