No power at pin 13 for fuel pump |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
No power at pin 13 for fuel pump |
carking1996 |
Aug 22 2018, 02:40 PM
Post
#1
|
Member Group: Members Posts: 69 Joined: 15-September 16 From: Ohio Member No.: 20,399 Region Association: North East States |
So trying to get these electrical issues fixed, I'm trying to use the original black red wire from the relay board for the fuel pump. I've got a ground connected to the proper place as shown in a lot of discussions/tech articles. But I have no power at pin 13. Any causes for this? Relay is good, everything seems like it should work, just no power at that pin with the key on (or off of course).
|
carking1996 |
Aug 23 2018, 11:30 AM
Post
#2
|
Member Group: Members Posts: 69 Joined: 15-September 16 From: Ohio Member No.: 20,399 Region Association: North East States |
So. Turns out I'm not getting power at the pump relay either. Bad board?
|
dr914@autoatlanta.com |
Aug 23 2018, 11:44 AM
Post
#3
|
914 Guru Group: Members Posts: 7,887 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None |
power to the board is provided through the red wire on pin 14 that attaches to the battery positive post, then goes through the fuel pump fuse a 25 amp in the rear position of the relay board (rear of the car)
So. Turns out I'm not getting power at the pump relay either. Bad board? |
Lo-Fi Version | Time is now: 1st June 2024 - 01:37 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |