 Inside Tunnel Rust |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DennisO |
 Aug 26 2018, 11:47 AM
Post
#1
|
|
Member  Group: Members Posts: 61 Joined: 9-June 17 From: Clayton, NC Member No.: 21,162 Region Association: South East States 
 |
Hi All,
I finally had time to get back to my '75 project after life kept getting in the way :-) I have about 95% of the car disassembled and have a pretty good idea of all the rust and hidden damage. The floor pans have some surface rust and a couple of spots that might need a patch (eg by brake/clutch pedals). However, the floor inside the tunnel has some pretty good rust that must be dealt with. Odd, but it look like water leaked just inside the tunnel and sat. Is there a good way to remove the tunnel to access the floor underneath? This is probably not a good idea, but can the floor be cut on both sides of the tunnel, removed, cleaned, painted, and rewelded? Any other ideas? Thanks, Dennis |
   |
 
|
  |
Replies
| Mike Bellis |
Aug 26 2018, 05:26 PM
Post
#2
|
|
Resident Electrician Group: Members Posts: 8,348 Joined: 22-June 09 From: Midlothian TX Member No.: 10,496 Region Association: None 
|
Eastwood makes a good rust converter that I have used. It turns the rust black and inert. Then you can prime or seal right over it.
|
|
|
|
| sithot |
Aug 26 2018, 05:33 PM
Post
#3
|
|
Member Group: Members Posts: 451 Joined: 25-October 06 From: Virginia Member No.: 7,090 Region Association: None
|
Extend by Loctite is a great product I've used for years.
|
|
|
|
Posts in this topic
DennisO Inside Tunnel Rust Aug 26 2018, 11:47 AM
Dave_Darling I don't think there's any good way. You c... Aug 26 2018, 12:05 PM DennisO Thanks Dave.
If the tunnel spot welds are removed... Aug 26 2018, 12:11 PM IronHillRestorations Taking out the center tunnel is a major undertakin... Aug 26 2018, 03:30 PM IronHillRestorations Here's the closest thing I could find to what ... Aug 26 2018, 03:46 PM mgphoto I've seen where a section of the tunnel is cut... Aug 26 2018, 05:35 PM DennisO Guys,
Thanks for all the great advice.
All the... Aug 26 2018, 06:33 PM IronHillRestorations The Ospho won't hurt getting into seams. I wo... Aug 26 2018, 08:06 PM
bbrock
The Ospho won't hurt getting into seams. I w... Aug 26 2018, 09:28 PM DennisO Perfect. I'll try it next weekend. thanks all.... Aug 26 2018, 09:36 PM Curbandgutter While you are in the mood shoot some of that coati... Aug 27 2018, 01:15 PM ClayPerrine Strip the tub to bare metal.
Clean up the rust on... Aug 27 2018, 03:18 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 12:21 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.