![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
Mikey914 |
![]()
Post
#1
|
The rubber man ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 12,767 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None ![]() ![]() |
So, I have made hundreds of these and have many satisfied customers. I flat tow longer distances as it gives me an insurance policy that if it stops running I can always get it back home at minimal expense. It's also the only way the wife will go on the further trips. You don't even notice it's there. I leave mine on all the time. The LE airdam allows for the bracket to be accessed without removing anything.
The assembly bolts to the "frame" at the front A arm mount point and we provide the hardened steel bolts to do so as part of the kit. The LE airdam is ONLY available at $125 with the purchase of the tow bar. Brackets are optional and not required if a Empi style tow bar is not used. So, who's interested? I'll post up more pictures later today. Attached thumbnail(s) ![]() |
![]() ![]() |
Mikey914 |
![]()
Post
#2
|
The rubber man ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 12,767 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None ![]() ![]() |
I didn't like the adapters I made so, I'm working on the adapters and will have ready in about 10 days.
The new ones will be $25 when ready and I will keep the GB open until They are complete + a week or two. If you want them you can wait. BUT the good news is I will GIVE you the ones I made. no charge. Will cost more to rework them than bend up new metal. They work but need the hole located up a little more (in my opinion) You be the judge, may save you $25 Thanks for your patience, mark |
Kansas 914 |
![]()
Post
#3
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,999 Joined: 1-March 03 From: Durango, Colorado Member No.: 373 Region Association: Rocky Mountains ![]() ![]() |
I didn't like the adapters I made so, I'm working on the adapters and will have ready in about 10 days. The new ones will be $25 when ready and I will keep the GB open until They are complete + a week or two. If you want them you can wait. BUT the good news is I will GIVE you the ones I made. no charge. Will cost more to rework them than bend up new metal. They work but need the hole located up a little more (in my opinion) You be the judge, may save you $25 Thanks for your patience, mark Hi Mark, Do you have a picture of the adapters? I have your bracket attached to my car and the Harbor Freight Tow Bar. I leave Tuesday (early AM) for California and would like to have something in case of catastrophic failure... I arrive at Rennsport Thursday in the 914 Corral. Thanks! |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 05:05 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |