 New 914 rear wheel bearing, No to very little grease from manufacture |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Luke M |
 Apr 10 2019, 12:05 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,469 Joined: 8-February 05 From: WNY Member No.: 3,574 Region Association: North East States 
 |
So, I just purchased a set of New FAG wheel bearing (made in Germany) so I can install a set of the later (74-89) 911 rear hubs on my 914 control arms.
I saw a few you tube videos about how the bearings for the Boxster where being shipped with little to no grease in them. I figured before I install them to check the grease. Well sure enough one side had little grease and the other side had very little to no grease on the bearings. I should've taken a few pics but didn't have my phone handy. I still have another new bearing to inspect so I'll take pics of that one. I'm sure it will be the same way. Now to go pick up some grease and repack them. So if anyone of you out there plan on replacing your rear bearing I would inspect them. Here's a handy video which shows how to do this. https://www.youtube.com/watch?v=l9P1R2clGAU |
   |
 
|
  |
Replies
| Superhawk996 |
Apr 12 2019, 02:41 PM
Post
#2
|
|
914 Guru Group: Members Posts: 7,730 Joined: 25-August 18 From: Woods of N. Idaho Member No.: 22,428 Region Association: Galt's Gulch
|
Out of curiosity what type of Honda? Im curious what type of bearing it is using.
Many of the new bearings are called GenIII bearings and have an orbitally formed hub that establishes Pre load. Mechanic really can’t screw those up like GENI (914 type) or GenII bearings. |
|
|
|
Posts in this topic
Luke M New 914 rear wheel bearing Apr 10 2019, 12:05 PM
914Sixer Luke,
Are those the ones I sent? They were old st... Apr 10 2019, 12:09 PM
Luke M
Luke,
Are those the ones I sent? They were old s... Apr 10 2019, 02:47 PM mepstein I’ll check mine before I install. They need grea... Apr 10 2019, 12:19 PM Superhawk996 Don't want to rehash this whole topic. Brent ... Apr 10 2019, 04:10 PM 914Sixer I now wonder how much is ENOUGH. Apr 10 2019, 08:46 PM Superhawk996 :evilgrin: That is the question isn't it.
T... Apr 11 2019, 04:47 AM mepstein I wondered after seeing the boxster video if it wa... Apr 11 2019, 05:29 AM Luke M The other thing that I noticed with the grease is ... Apr 11 2019, 06:11 AM bbrock You have to scroll down to the second one I opened... Apr 11 2019, 07:16 AM Superhawk996 :stir:
Bearings don't need much "lube... Apr 11 2019, 08:17 AM bbrock
:stromberg: still can happen though but it is ra... Apr 11 2019, 09:20 AM Superhawk996 :stir:
The other thing to keep in mind for you g... Apr 11 2019, 08:45 AM Superhawk996 :Qarl:
And to think - I started off never intend... Apr 11 2019, 09:54 AM bbrock
:Qarl:
And to think - I started off never inten... Apr 11 2019, 11:10 AM Superhawk996 In the spirit of Laurel and Hardy.
jzNbCWBJsSg Apr 11 2019, 12:04 PM KELTY360
In the spirit of Laurel and Hardy.
jzNbCWBJsSg... Apr 11 2019, 02:11 PM Luke M I got around to repacking the bearings today.
I op... Apr 11 2019, 05:30 PM bbrock
I got around to repacking the bearings today.
I o... Apr 12 2019, 11:21 AM worn
So, I just purchased a set of New FAG wheel beari... Apr 11 2019, 07:26 PM shane This is probably a dumb question but it’s not my... Apr 11 2019, 08:17 PM davep There is a good possibility that there is a bearin... Apr 12 2019, 10:25 AM Morph914 Out of curiosity I took apart my old one that appe... Apr 12 2019, 01:15 PM Superhawk996 :stir:
:dance: Apr 12 2019, 01:16 PM Superhawk996 Any of you guys checking the bearing grease on you... Apr 12 2019, 01:24 PM bbrock
Any of you guys checking the bearing grease on yo... Apr 12 2019, 01:38 PM Superhawk996 :rotfl:
:stir:
The other thing that drastical... Apr 12 2019, 02:34 PM bbrock
Out of curiosity what type of Honda? Im curious ... Apr 12 2019, 02:52 PM Superhawk996 Can’t tell for sure but it appears from YouTube ... Apr 12 2019, 03:32 PM bbrock
but I assume you are AWD given your location.
... Apr 12 2019, 05:53 PM Superhawk996 "I would assume the factory trained mechanics... Apr 12 2019, 06:16 PM Superhawk996 :evilgrin:
Not done yet.
Bearing pre-load, or ... Apr 12 2019, 06:35 PM mepstein We hired two techs from Honda. I don’t think the... Apr 12 2019, 07:34 PM bbrock Good info. Might be true about Honda techs but we... Apr 12 2019, 10:03 PM mepstein
Good info. Might be true about Honda techs but w... Apr 13 2019, 05:40 AM bbrock
Good info. Might be true about Honda techs but ... Apr 13 2019, 08:48 AM Superhawk996 @[url=http://www.914world.com/bbs2/index.php?showu... Apr 13 2019, 07:15 AM bbrock
Brent, I just want to be completely transparent t... Apr 13 2019, 08:56 AM mepstein I used to use light oil on the bearings of my trac... Apr 13 2019, 08:37 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th March 2026 - 02:22 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.