 Louvered panel install |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Trevor Gates |
 Apr 22 2019, 02:41 PM
Post
#1
|
|
Newbie  Group: Members Posts: 12 Joined: 8-April 19 From: San Clemente, CA Member No.: 23,021 Region Association: Southern California  |
I’ve been meaning to share these pics as a small how to on installing this panel from Patrick Motorsports. https://patrickmotorsports.com/collections/...9146l-vrpan-pmp
A friend and neighbor has a 914 and I installed one in his car and he told a friend about it, except his friend wanted to add more lovers, so sure, let’s do it.  |
   |
 
|
  |
Replies
| maf914 |
Apr 23 2019, 10:28 AM
Post
#2
|
|
Not a Guru! Group: Members Posts: 3,049 Joined: 30-April 03 From: Central Florida Member No.: 632 Region Association: None 
|
Steve,
Do you have a front mounted oil cooler under that duct? I was wondering where the cooling air for the AC condenser comes from. Is there additional ducting that is not obvious in the photo? |
|
|
|
| Steve |
Apr 23 2019, 01:42 PM
Post
#3
|
|
914 Guru Group: Members Posts: 5,857 Joined: 14-June 03 From: Laguna Niguel, CA Member No.: 822 Region Association: Southern California
|
QUOTE(maf914 @ Apr 23 2019, 09:28 AM)  Steve, Do you have a front mounted oil cooler under that duct? I was wondering where the cooling air for the AC condenser comes from. Is there additional ducting that is not obvious in the photo? Yes there is a PMS oil cooler under the shroud. I shortened the shroud so the air exits underneath in front of the condenser. For the condenser, the air enters through the front holes on each side of the shroud. I use the tire board on top of the shroud to force the air through the condenser. The oil cooler has fans and a thermostat. The condenser also has its own fan. I have not plumbed the AC yet, so we will see how well it works... I have a Benling DC Compressor and small evaporator for the console. |
 |
|
Posts in this topic
Trevor Gates Louvered panel install Apr 22 2019, 02:41 PM
Trevor Gates RE: Louvered panel install Apr 22 2019, 02:43 PM Trevor Gates The spacing of the louvers is 42mm’s. I cut the ... Apr 22 2019, 02:47 PM Trevor Gates RE: Louvered panel install Apr 22 2019, 02:50 PM Trevor Gates Previous hole was already in the floor, blue dykem... Apr 22 2019, 02:55 PM Trevor Gates RE: Louvered panel install Apr 22 2019, 02:57 PM Trevor Gates TIG welded in. At this point you can either sand d... Apr 22 2019, 03:01 PM Steve Thanks Trevor!! Awesome work and thanks f... Apr 22 2019, 06:48 PM
Trevor Gates Hey Steve! Thanks! Congrats on the paint ... Apr 23 2019, 10:40 AM Steve
Hey Steve! Thanks! Congrats on the paint... Apr 23 2019, 01:43 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:55 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.