3D Printed Center Sun Visor Mount, Hard to find part-- I can make it! |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
3D Printed Center Sun Visor Mount, Hard to find part-- I can make it! |
Robarabian |
Apr 29 2019, 09:45 PM
Post
#1
|
914 A Roo Group: Members Posts: 592 Joined: 11-February 19 From: Simi Valley, Kalifornia Member No.: 22,865 Region Association: Southern California |
So I got my son a 3d printer last year. Been learning how to use it. I found the plan to print a 914 center mount for the sun visor. Sometimes the parts are hard to come by.
If anyone needs one, I can print it. I didn't do the artwork, but it is accurate and works well. Maybe this is already on the forum, but I thought I would throw it out there. Print time is about 2.5 hours so they don't just pop out. PM me if you really need one, not just want a spare. |
Spoke |
Apr 30 2019, 03:33 AM
Post
#2
|
Jerry Group: Members Posts: 6,991 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None |
So I got my son a 3d printer last year. Been learning how to use it. I found the plan to print a 914 center mount for the sun visor. Sometimes the parts are hard to come by. If anyone needs one, I can print it. I didn't do the artwork, but it is accurate and works well. Maybe this is already on the forum, but I thought I would throw it out there. Print time is about 2.5 hours so they don't just pop out. PM me if you really need one, not just want a spare. Nice looking print. What type of material did you use? Also what layer thickness did you use? 0.1mm? 2.5 hours seems like a long time for that part. |
Robarabian |
Apr 30 2019, 10:07 AM
Post
#3
|
914 A Roo Group: Members Posts: 592 Joined: 11-February 19 From: Simi Valley, Kalifornia Member No.: 22,865 Region Association: Southern California |
Rafts: Doesn't Matter
Supports: Doesn't Matter Resolution: .2 Infill: 90% Filament_brand: Snapmaker Filament_material: ABS or PLA (either will work) I set the printer on the highest quality setting which is why it took longer. If I put it at "normal" or even the lighter setting, it would do it in 45 minutes likely. I wanted the highest quality rigid part that I could get. So I got my son a 3d printer last year. Been learning how to use it. I found the plan to print a 914 center mount for the sun visor. Sometimes the parts are hard to come by. If anyone needs one, I can print it. I didn't do the artwork, but it is accurate and works well. Maybe this is already on the forum, but I thought I would throw it out there. Print time is about 2.5 hours so they don't just pop out. PM me if you really need one, not just want a spare. Nice looking print. What type of material did you use? Also what layer thickness did you use? 0.1mm? 2.5 hours seems like a long time for that part. |
Lo-Fi Version | Time is now: 8th June 2024 - 04:13 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |