Where does this white wire go? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Where does this white wire go? |
John90290 |
May 18 2019, 12:13 PM
Post
#1
|
Member Group: Members Posts: 93 Joined: 4-March 18 From: Ventura, CA Member No.: 21,937 Region Association: None |
1975 1.8 FI. Got engine back in and most things commented bit don’t know what this white wire connects to ?
Attached thumbnail(s) |
dlee6204 |
May 18 2019, 12:46 PM
Post
#2
|
Howdy Group: Members Posts: 2,162 Joined: 30-April 06 From: Burnsville, NC Member No.: 5,956 |
That wire should be connected to your CHT sensor. The other wire connector that you currently have your cht plugged into with the green wire... that green wire I think goes to your oil temperature sensor IIRC.
|
SirAndy |
May 19 2019, 09:16 AM
Post
#3
|
Resident German Group: Admin Posts: 41,675 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
That wire should be connected to your CHT sensor. The other wire connector that you currently have your cht plugged into with the green wire... that green wire I think goes to your oil temperature sensor IIRC. (IMG:style_emoticons/default/agree.gif) Green/Black is oil temp, there should be a matching one coming out of the main harness on the fire wall that plugs into that instead of the CHT. (IMG:style_emoticons/default/sunglasses.gif) |
John90290 |
May 19 2019, 10:20 AM
Post
#4
|
Member Group: Members Posts: 93 Joined: 4-March 18 From: Ventura, CA Member No.: 21,937 Region Association: None |
That wire should be connected to your CHT sensor. The other wire connector that you currently have your cht plugged into with the green wire... that green wire I think goes to your oil temperature sensor IIRC. (IMG:style_emoticons/default/agree.gif) Green/Black is oil temp, there should be a matching one coming out of the main harness on the fire wall that plugs into that instead of the CHT. (IMG:style_emoticons/default/sunglasses.gif) I got the green red out of harness to oil pressure switch. White now to cht. This leaves the green black unattached. That’s the one I had connected to the cht. In the original picture. Attached thumbnail(s) |
SirAndy |
May 19 2019, 10:31 AM
Post
#5
|
Resident German Group: Admin Posts: 41,675 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
That wire should be connected to your CHT sensor. The other wire connector that you currently have your cht plugged into with the green wire... that green wire I think goes to your oil temperature sensor IIRC. (IMG:style_emoticons/default/agree.gif) Green/Black is oil temp, there should be a matching one coming out of the main harness on the fire wall that plugs into that instead of the CHT. I got the green red out of harness to oil pressure switch. White now to cht. This leaves the green black unattached. That’s the one I had connected to the cht. In the original picture. *main* harness, not engine harness. There should be a green/black coming out of the main harness near the hell hole. There should be a couple of wires that split to the passenger side from the main snorkel coming up in the center of the firewall. (IMG:style_emoticons/default/idea.gif) |
Lo-Fi Version | Time is now: 6th June 2024 - 03:14 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |