 Horn pad fitment, |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| dt4 |
 Aug 21 2019, 05:43 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 503 Joined: 26-May 19 From: England Member No.: 23,161 Region Association: England 
 |
I am presuming that when the pad twists and locks into place it should be pretty secure?
I have tried it numerous times and have repositioned the plate on the back of the pad in all its possible orientations but the fit is really loose Is there a knack or some way of adjusting the fit? |
   |
 
|
  |
Replies
| FlacaProductions |
Aug 21 2019, 02:55 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,914 Joined: 24-November 17 From: LA Member No.: 21,628 Region Association: Southern California
|
 |
|
|
|
| dt4 |
Aug 21 2019, 03:12 PM
Post
#3
|
|
Senior Member Group: Members Posts: 503 Joined: 26-May 19 From: England Member No.: 23,161 Region Association: England
|
QUOTE(FlacaProductions @ Aug 21 2019, 09:55 PM)  (IMG:style_emoticons/default/beerchug.gif) I will look through the boxes of parts and see if it is there, if not I am sure I will be putting in an order for things that need replacing / are missing so I'll put a list together as the exchange rate plus shipping is going to be a killer so I dont want to be placing frequent small orders |
|
|
|
| sithot |
Aug 24 2019, 08:17 PM
Post
#4
|
|
Member Group: Members Posts: 448 Joined: 25-October 06 From: Virginia Member No.: 7,090 Region Association: None
|
Where does one find the "bakelite" (?) insulators that stand-off the tension spring from the horn plate?
I used some fiber washers on two of mine that were "too close to call" for creating a problem. Thanks! Tom |
|
|
|
| raynekat |
Aug 25 2019, 02:13 AM
Post
#5
|
|
Advanced Member Group: Members Posts: 2,169 Joined: 30-December 14 From: Coeur d'Alene, Idaho Member No.: 18,263 Region Association: Pacific Northwest
|
QUOTE(sithot @ Aug 24 2019, 07:17 PM) Where does one find the "bakelite" (?) insulators that stand-off the tension spring from the horn plate? I used some fiber washers on two of mine that were "too close to call" for creating a problem. Thanks! Tom Reproduction kit is here: https://sierramadrecollection.com/Horn-Butt...-76-p21568.html |
|
|
|
| sithot |
Aug 25 2019, 04:45 AM
Post
#6
|
|
Member Group: Members Posts: 448 Joined: 25-October 06 From: Virginia Member No.: 7,090 Region Association: None
|
QUOTE(raynekat @ Aug 25 2019, 04:13 AM) QUOTE(sithot @ Aug 24 2019, 07:17 PM) Where does one find the "bakelite" (?) insulators that stand-off the tension spring from the horn plate? I used some fiber washers on two of mine that were "too close to call" for creating a problem. Thanks! Tom Reproduction kit is here: https://sierramadrecollection.com/Horn-Butt...-76-p21568.html Thank you. (IMG:style_emoticons/default/beerchug.gif) |
|
|
|
Posts in this topic
dt4 Horn pad fitment Aug 21 2019, 05:43 AM
Minerva's 914
I am presuming that when the pad twists and locks... Aug 21 2019, 06:24 AM Mike Fitton Tension spring is probably broken, it is the piece... Aug 21 2019, 06:47 AM
dt4
Tension spring is probably broken, it is the piec... Aug 21 2019, 07:00 AM dt4 RE: Horn pad fitment Aug 21 2019, 07:14 AM dr914@autoatlanta.com tighten the three screws and make sure a horn boot... Aug 21 2019, 07:48 AM dt4
tighten the three screws and make sure a horn boo... Aug 21 2019, 02:12 PM dr914@autoatlanta.com the horn boot is missing looks like a squashed bla... Aug 21 2019, 02:26 PM dr914@autoatlanta.com also we had these horn base plates made because of... Aug 21 2019, 07:52 AM mmichalik I had the exact same problem, sloppy horn button o... Aug 25 2019, 11:31 AM dt4
I had the exact same problem, sloppy horn button ... Aug 25 2019, 12:44 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 05:39 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.