 Shift Rod Pin, Removal |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ballsyfacts914 |
 Sep 14 2019, 01:30 PM
Post
#1
|
|
Member  Group: Members Posts: 82 Joined: 28-August 19 From: East Bay Region-SF Bay Area Member No.: 23,413 Region Association: Northern California  |
The shift rod has a pin right after the firewall that connects the rod to the transmission. Both of the bushings were completely gone, as in not even there. Not really sure how I drove it home. Everything I can find shows how to remove the pin but the bushings are part of the process...I don't have bushings so everything on removal doesn't work.
I have tried using a vice, I have tried a punch but nothing friggin works... (IMG:style_emoticons/default/blink.gif) I have managed to damage ever so slightly one end of the pin but don't think it is a big deal, no mushrooming. How do I get this damn pin out? Thanks |
   |
 
|
  |
Replies
| rhodyguy |
Sep 14 2019, 01:59 PM
Post
#2
|
|
Chimp Sanctuary NW. Check it out. Group: Members Posts: 22,240 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch |
Did you try pushing the pin into a deep socket with the vise? Big enough to receive the pin and rest on the bushings. Use an about the same diameter, just smaller the pin, bolt. Hold the bolt with a pair of vise grips. A little penetrant would help.
|
|
|
|
Posts in this topic
ballsyfacts914 Shift Rod Pin Sep 14 2019, 01:30 PM
JOEPROPER I did mine today. I pressed it out with a hydraul... Sep 14 2019, 01:34 PM ballsyfacts914 I went to a machine shop that had a 20 ton press a... Sep 14 2019, 04:18 PM mtndawg I’ve used a vice and socket on multiple cars.
h... Sep 15 2019, 09:12 AM
IronHillRestorations I also use a vise with a couple sockets, one 1/4... Sep 15 2019, 03:22 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 06:49 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.