 Shift Rod Pin, Removal |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ballsyfacts914 |
 Sep 14 2019, 01:30 PM
Post
#1
|
|
Member  Group: Members Posts: 82 Joined: 28-August 19 From: East Bay Region-SF Bay Area Member No.: 23,413 Region Association: Northern California  |
The shift rod has a pin right after the firewall that connects the rod to the transmission. Both of the bushings were completely gone, as in not even there. Not really sure how I drove it home. Everything I can find shows how to remove the pin but the bushings are part of the process...I don't have bushings so everything on removal doesn't work.
I have tried using a vice, I have tried a punch but nothing friggin works... (IMG:style_emoticons/default/blink.gif) I have managed to damage ever so slightly one end of the pin but don't think it is a big deal, no mushrooming. How do I get this damn pin out? Thanks |
   |
 
|
  |
Replies
| IronHillRestorations |
Sep 15 2019, 03:22 PM
Post
#2
|
|
I. I. R. C. Group: Members Posts: 6,813 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None 
|
I also use a vise with a couple sockets, one 1/4" drive just smaller than the diameter of the pin and a deep well socket on the other side; and heat if required. I've taken dozens of those apart and I have had only had one that I couldn't get the pin out.
|
|
|
|
Posts in this topic
ballsyfacts914 Shift Rod Pin Sep 14 2019, 01:30 PM
JOEPROPER I did mine today. I pressed it out with a hydraul... Sep 14 2019, 01:34 PM rhodyguy Did you try pushing the pin into a deep socket wit... Sep 14 2019, 01:59 PM ballsyfacts914 I went to a machine shop that had a 20 ton press a... Sep 14 2019, 04:18 PM mtndawg I’ve used a vice and socket on multiple cars.
h... Sep 15 2019, 09:12 AM
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 08:24 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.