 Where do people put the DME on a 3.2 L 914/6 conversion |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Tdskip |
 Dec 19 2019, 08:22 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 3,737 Joined: 1-December 17 From: soCal Member No.: 21,666 Region Association: None 
 |
Is there a best practice I should be aware of here as I continue to plan this out?
Thanks! |
   |
 
|
  |
Replies
| scallyk9 |
Dec 21 2019, 03:48 PM
Post
#2
|
|
Member Group: Members Posts: 357 Joined: 16-October 16 From: Port Orchard, WA, USA Member No.: 20,499 Region Association: Pacific Northwest
|
My DME for the 3.2L is located vertically just off the floor, in front of the stock backpad and behind the passenger seat. Relay is next to it with a spare in the glovebox. The seat still retracts but not quite fully flush into the backpad. Works well and no moisture access.
|
|
|
|
| Coondog |
Dec 21 2019, 04:18 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 2,089 Joined: 24-September 15 From: Apple Valley Calif Member No.: 19,195 Region Association: Southern California
|
QUOTE(scallyk9 @ Dec 21 2019, 01:48 PM)  My DME for the 3.2L is located vertically just off the floor, in front of the stock backpad and behind the passenger seat. Relay is next to it with a spare in the glovebox. The seat still retracts but not quite fully flush into the backpad. Works well and no moisture access. Ditto...... (IMG:style_emoticons/default/smilie_pokal.gif) |
|
|
|
Posts in this topic
Tdskip Where do people put the DME on a 3.2 L 914/6 conversion Dec 19 2019, 08:22 PM
Mark Henry In the car.
Sorry I couldn't r... Dec 19 2019, 08:31 PM mepstein Behind the driver or passenger seat most often.
O... Dec 19 2019, 08:31 PM Tdskip
In the car.
Sorry I couldn't resist :rotfl... Dec 19 2019, 08:54 PM
mepstein
[quote name='Mark Henry' post='2771012' date='Dec... Dec 19 2019, 09:19 PM ClayPerrine I put mine under the foam block on the passenger f... Dec 19 2019, 09:04 PM Tdskip
I put mine under the foam block on the passenger ... Dec 19 2019, 09:06 PM SirAndy Under the dash on the passenger side ...
:popcorn... Dec 19 2019, 09:10 PM mepstein
Under the dash on the passenger side ...
:popcor... Dec 19 2019, 09:14 PM ClayPerrine
Under the dash on the passenger side ...
:popcor... Dec 19 2019, 09:14 PM SirAndy
[quote name='SirAndy' post='2771036' date='Dec 19... Dec 19 2019, 10:47 PM SirAndy The PMS harness was actually long enough to mount ... Dec 19 2019, 10:49 PM Tdskip Don’t think mine will reach either, great spot h... Dec 19 2019, 09:18 PM Steve Mine fits perfect behind the drivers seat. I use ... Dec 19 2019, 11:23 PM sixnotfour
Don’t think mine will reach either, great spot ... Dec 19 2019, 11:36 PM Tdskip
Don’t think mine will reach either, great spot... Dec 20 2019, 09:13 AM Steve
[quote name='sixnotfour' post='2771062' date='Dec... Dec 20 2019, 09:44 PM Maltese Falcon I've seen a few conversions where the DME/ alt... Dec 20 2019, 11:04 AM sixnotfour http://www.914world.com/bbs2/index.php?showtopic=1... Dec 20 2019, 12:05 PM sixnotfour :beer3: Dec 20 2019, 12:28 PM Cairo94507 Mine is under the driver's seat. Definitely w... Dec 20 2019, 02:19 PM porschetub Any where Porsche don't put them,what were the... Dec 20 2019, 03:14 PM mepstein
Any where Porsche don't put them,what were th... Dec 20 2019, 04:43 PM Tdskip Thanks for the ideas and pictures. I’d be inclin... Dec 20 2019, 03:37 PM Maltese Falcon A friend had his 996 cab (top up) windows down, pa... Dec 20 2019, 05:41 PM SKI-HI Mine is in the rear trunk. Stock harness ,works ... Dec 20 2019, 07:15 PM Tdskip Boxster ECU issues due to wet floors are not uncom... Dec 20 2019, 08:19 PM mepstein The PMS harness connects the chassis harness to th... Dec 20 2019, 09:43 PM SirAndy
The PMS harness connects the chassis harness to t... Dec 21 2019, 12:32 AM Tdskip
The PMS harness connects the chassis harness to t... Dec 21 2019, 11:05 AM mepstein
The PMS harness connects the chassis harness to ... Dec 21 2019, 02:59 PM buck toenges Mine is placed in the center console vertically. Dec 21 2019, 10:13 AM Mark Henry If you made a watershield, like a small aluminum b... Dec 21 2019, 02:52 PM Tdskip @mepstein - true, yes, but a bit embarrassing I ... Dec 21 2019, 03:52 PM mepstein
[b]@[url=http://www.914world.com/bbs2/index.php?s... Dec 21 2019, 04:42 PM Tdskip
[b]@[url=http://www.914world.com/bbs2/index.php?... Dec 21 2019, 04:43 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th July 2025 - 04:18 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.