Fiberglass Sheridan front end - P 7 /8, Now done will have body in white soon! Options

[Mikey914]

So we have the molds and are cleaning them. We did not get the substructure molds and are making them now. we are looking to pull a set in fiberglass and carbon fiber.
we will have the options to add balsa just like the GT hoods.
Option for headlight delete hoods will be available for both. I will post more as we move along, but we will need to do some repair work on the molds to get to the point we can pull parts. we will then figure out how much they cost to make.

Planning to run 10 sets at a large discount to launch these. Number sill follow
So who's interested at least for now?

[Mikey914]

We decided to start with the GT type and stock hoods. The only difference is that we do have an option for a headlight delete hood. Basically covers the buckets made for those that have removed the headlights ( That's more of a racing option ). As we have that mold.

The idea is that we want to supply a suitable replacement for 914 hoods that have rusted out I have a car with this issue and I have see a few others do too.

Our initial plan was to do a gray primer gel coat, so that you could scuff with a 600 grit and shoot.

The white gel coat is easily done fro the balsa reinforced ones. Matt is doing some research right now to to determine exactly what the factor layup of these looked like.

More to come soon