Look what I found at the junkyard today, Found 72 porsche Options

[Aefcaf]

Afternoon everyone, I'm back after 15 years form the 914 world. I have decided to begin building another car over the next few years and began today sourcing parts for the shelf. Came across this 19mm swaybar. Can anyone tell me what 911 it came from and if this would be a good fit for a tight front end? I'm planning on doing a subaru sti conversion to bop around town on weekends. Any suspension comments are greatly appreciated as well. I will also need help identifying some of the parts I'm finding at these local junkyards.....FYI i scored the swaybar for $15 with hardware that is not pictured.

[flyer86d]

That is a 19mm H&H swaybar. It mounts in the stock 914 location and as you can see, has 4 stiffness settings. I ran the 19mm front set at the softest setting and their 16 mm rear on our first 914 which we autocrossed and DE’d extensively way back when. I also have some time in a 73 2 liter that had the same swaybar setup but with 21mm torsion bars and 140 pound springs and all delrin bushings. That was a great autocross setup. I didn’t find the ride objectionable and it handled like a go cart. I still have the suspension setup off of that car. It’ll go on the 6.

Charlie