![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
brcacti |
![]()
Post
#1
|
1974 914 1.8 ![]() ![]() ![]() Group: Members Posts: 674 Joined: 17-July 19 From: PHX AZ 60 miles south Member No.: 23,302 Region Association: Southwest Region ![]() |
Hello, can I jack up the car at the donut points or not? I think there are 4 donut points, two front, two back. My gasket kit did not yet come in time for this weekend's oil change. All together does anyone have a picture of all the gaskets that come in the kit? As far as I can tell there are two small washers, one for the strainer and one for the regular plug, two larger type gaskets for the strainer. Is this correct?
|
![]() ![]() |
iankarr |
![]()
Post
#2
|
The wrencher formerly known as Cuddy_K ![]() ![]() ![]() ![]() Group: Members Posts: 2,556 Joined: 22-May 15 From: Heber City, UT Member No.: 18,749 Region Association: Intermountain Region ![]() ![]() |
I do the strainer every other change. The strainer itself is almost always pretty clean. But sludge gets trapped below the strainer...between the base of it and the sump cover. There's a disgusting shot of it in my oil change video. The sump cover is not that big an area and when it gets filled, the sludge can overflow and circulate, rather than sit at the bottom of the engine.
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 11th May 2025 - 04:50 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |