Fiberglass Sheridan front end - P 7 /8, Now done will have body in white soon! Options

[Mikey914]

So we have the molds and are cleaning them. We did not get the substructure molds and are making them now. we are looking to pull a set in fiberglass and carbon fiber.
we will have the options to add balsa just like the GT hoods.
Option for headlight delete hoods will be available for both. I will post more as we move along, but we will need to do some repair work on the molds to get to the point we can pull parts. we will then figure out how much they cost to make.

Planning to run 10 sets at a large discount to launch these. Number sill follow
So who's interested at least for now?

[Mikey914]

Actually we are setting these up to not require pins, however they look sharp. We will probably do a run of the pins and plates. It will require a lower tension spring that we are also working on for the front trunk.
We will offer just the skins for those that want to use pins or dzus screws to attach too. Just like Sheridan did when he made them. The internal support structure is something we are making to make mount like the stock lids. More to come this week.
Mark