![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
jaredmcginness |
![]()
Post
#1
|
... ![]() ![]() ![]() Group: Members Posts: 508 Joined: 12-June 19 From: Baltimore Member No.: 23,209 Region Association: MidAtlantic Region ![]() ![]() |
https://rmsothebys.com/en/auctions/mo20/shi...sche-916/951867
Can we pool some dough together? I’ll take her every other Tuesday. When I saw it at Luft last year, the seats were worn and ripped up. I’m sure it was quite a hardship trying to find that fabric.* A few pics added for the lazy: (IMG:http://www.914world.com/bbs2/uploads_offsite/i.imgur.com-23209-1596798806.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.imgur.com-23209-1596798807.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i.imgur.com-23209-1596798807.3.jpg) *P.S. While digging I found a SpeedHunters article with some great photos showing the wear in the seats, they look the same in the RMS photos - So I suppose the fabric was not replaced. |
![]() ![]() |
brcacti |
![]()
Post
#2
|
1974 914 1.8 ![]() ![]() ![]() Group: Members Posts: 674 Joined: 17-July 19 From: PHX AZ 60 miles south Member No.: 23,302 Region Association: Southwest Region ![]() |
Hello, forgive my ignorance what is the difference from a 916 and 914-6 ?
|
DRPHIL914 |
![]()
Post
#3
|
Dr. Phil ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,821 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States ![]() ![]() |
Hello, forgive my ignorance what is the difference from a 916 and 914-6 ? only 11 916 made , about 3300 914-6 made, they had a 2.0L 6, fiberglass removable top, etc, chrome bumpers . the 916 had either a 2.4L or 2.7L motor, welded in place hard steel top and fiberglass formed front and rear bumpers and factory steel flares, fancy interior. 10 of those and one that was owned by Porsche family that had a 2.9L factory race motor, these were prototypes and it never went to production was made around the end of 1972 i think, whereas the 914/6 were made between end of ‘69 for the 1970MY and ran up to about 1972 if my information is correct, actual production car, but stopped due to low sales and cost over runs due to weak dollar. cost was getting too close to a 911. btw the 916 wirh the 2.7 motor was the fastest car made by Porsche at the time. lighter than a 911, faster quicker better handling, but would have cost close to $15,000 retail if they had gone into full production. a quick google search will bring up some exact numbers dates and history but that’s what i’ve gleaned from reading here and a few other places. Phil |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 02:41 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |