 Speedo angle drive oil seal removal, how do you get the bas#ard out ????? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| porschetub |
 Aug 8 2020, 07:11 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 4,994 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None  |
As per question,TIA
|
   |
 
|
  |
Replies
| porschetub |
Aug 24 2020, 07:15 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 4,994 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
Continuing on or "while you are in there" as they say,no leaks @ speedo drive,moved on to my rear shifter rod...found locking screw on the fwd uni-joint was loose ,kicking myself as I hadn't drilled a detent for the locking screw (IMG:style_emoticons/default/slap.gif) so it was moving around so fixed that.
Just found with all the caked up grease removed from the shifter,genuine cable fitted,and adjustment of cable position has really improved the action,test drive will confirm. Happy with results (IMG:style_emoticons/default/biggrin.gif) . |
|
|
|
| porschetub |
Aug 26 2020, 10:01 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 4,994 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
QUOTE(porschetub @ Aug 25 2020, 01:15 PM)  Continuing on or "while you are in there" as they say,no leaks @ speedo drive,moved on to my rear shifter rod...found locking screw on the fwd uni-joint was loose ,kicking myself as I hadn't drilled a detent for the locking screw (IMG:style_emoticons/default/slap.gif) so it was moving around so fixed that. Just found with all the caked up grease removed from the shifter,genuine cable fitted,and adjustment of cable position has really improved the action,test drive will confirm. Happy with results (IMG:style_emoticons/default/biggrin.gif) . Test drove today,much smoother shift ,didn't do a gearshift alignment cause it was right,reset the rear shift rod straight up and down in neutral. No result on my popping 4th gear but still happy with worthwhile results,funny thing as it will shift to 4th with the car sitting and moves the car forward on a combo of throttle and clutch footwork,wasn't doing that before latest work (IMG:style_emoticons/default/confused24.gif) . Good results with my breather tube from oil tank vent to aircleaner fitting,it sucks the moisture down instead of draining back to the tank....what was I thinking with my old K&N setup .... |
|
|
|
Posts in this topic
porschetub Speedo angle drive oil seal removal Aug 8 2020, 07:11 PM
bdstone914 @porschetub
Carve out the inner lip with a knife... Aug 8 2020, 07:49 PM
porschetub
[b]@[url=http://www.914world.com/bbs2/index.php?s... Aug 8 2020, 09:58 PM Mikey914 If the drive is out you can get behind it easy eno... Aug 9 2020, 01:24 AM Frankvw listen, there is a very easy trick to get it out. ... Aug 9 2020, 04:01 AM Tdskip
listen, there is a very easy trick to get it out.... Aug 9 2020, 05:56 AM porschetub Saga continues,found a fair amount of wear on the ... Aug 10 2020, 05:33 PM bdstone914 @porschetub
Note the erosion on the aluminum wea... Aug 10 2020, 10:01 PM Mikey914 Your more likely to have fluid leak at the worn se... Aug 10 2020, 09:28 PM porschetub Thanks guys,my reason for removing it was the chan... Aug 11 2020, 01:42 PM porschetub Topped off the trans only a small amount to top sp... Aug 12 2020, 11:20 PM Frankvw porschetub, you asked for comments, here mine:
... Aug 13 2020, 01:24 AM porschetub
porschetub, you asked for comments, here mine:
... Aug 13 2020, 03:01 PM brian minson I had to replace the seal on mine a few months bac... Aug 13 2020, 04:06 PM porschetub
I had to replace the seal on mine a few months ba... Aug 20 2020, 06:48 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th January 2026 - 10:36 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.