How to clean up a pan o' brake fluid, how to prep for a new pedal set and master cylinder Options

[boxster914]

I'm about 3 weeks into my relationship with my new '71 Irish Green 914.



Firstly, I can't tell you how supportive and informative the 914world.com community has been. You have all been just great. I feel like I can do anything knowing that y'all have my back!

A special shout out goes to Bruce ( @bdstone914 ) who has been AWESOME in helping me sort out my braking issues.

I'm writing in this post to ask about my current problem, which is that my drivers side floorpan is full of brake fluid, bubbling paint and basically a huge mess.



The master cylinder failed and so now I need to clean up the pan before I install my new pedal set (from Bruce) and master cylinder.

I'm a total newb so here's what I'm thinking and please tell me if you know better.

I'm thinking about sopping up what brake fluid I can, going over the pan with some brake cleaner to really clean it up, then stripping the paint with paint stripper, cleaning the bare metal with wurth clean prep then painting it with rustoleum flat black paint.

Please let me know if there is a better way to do this.

I, of course, want to prevent further corrosion and to protect the floor.

[iankarr]

With POR 15 it's all about the prep. Good stuff if done right. But be super careful and ALWAYS use a proper cartridge respirator with that stuff. There are horror stories of people who lost lung function after just a few minutes unmasked.