Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Euro driving light install
L-Jet914
post Oct 30 2020, 10:16 PM
Post #1


Member
**

Group: Members
Posts: 254
Joined: 24-October 12
From: Davis, CA
Member No.: 15,080
Region Association: Northern California



I recently purchased a set of Euro Hella 118 914 driving lights to install on my 74 which are en route. The wires are all stripped with no connectors. Are the factory connectors male or female spade connectors on the light assembly side. Also I believe I will need to add a relay and switch to turn on the lights. What amperage fuse is used for the Euro halogen driving lights?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
dr914@autoatlanta.com
post Oct 31 2020, 07:29 AM
Post #2


914 Guru
*****

Group: Members
Posts: 7,900
Joined: 3-January 07
From: atlanta georgia
Member No.: 7,418
Region Association: None



since the driving lights go through their own relay the standard 16 amp fuse is perfect. The harness is there on every 914, white with yellow for the positive hot lead, brown for the ground. Factory driving / fog/rear window defrost switches are hard to find, but hella makes an aftermarket in the exact same configuration. Relay just plugs into the empty slot on the fuse block above your left knee


QUOTE(L-Jet914 @ Oct 30 2020, 09:16 PM) *

I recently purchased a set of Euro Hella 118 914 driving lights to install on my 74 which are en route. The wires are all stripped with no connectors. Are the factory connectors male or female spade connectors on the light assembly side. Also I believe I will need to add a relay and switch to turn on the lights. What amperage fuse is used for the Euro halogen driving lights?

User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 15th June 2024 - 09:42 PM