Stripped Ground strap bolt, Bolt below rear trunk that attaches to transmission |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Stripped Ground strap bolt, Bolt below rear trunk that attaches to transmission |
Wew |
Jun 23 2021, 11:14 AM
Post
#1
|
Member Group: Members Posts: 227 Joined: 17-January 15 From: Novato, ca Member No.: 18,335 Region Association: None |
Hi all,
I did the bonehead maneuver of leaving the ground strap attached to the transmission and the body (below the rear trunk) when dropping my motor. I have a harbor freight tap set but that didn't work trying to rethread the bolt. Any other suggestions and or work arounds at the motor is back in the car and am waiting on a few things on order and would like to address this issue sometime soon. It does look like its a bolt that actually goes all the way through and I was considering using a cut off wheel on the top and re welding a new bolt into the opening. Hoping their is an easier fix but if I have to, what the heck. Interested in seeing what other members have done to remedy this issue. If you did replace the bolt please let me know what size and type you used so I can go pick up the correct size. Thanks, Gary |
GregAmy |
Jun 23 2021, 11:31 AM
Post
#2
|
Advanced Member Group: Members Posts: 2,311 Joined: 22-February 13 From: Middletown CT Member No.: 15,565 Region Association: North East States |
I was considering using a cut off wheel on the top and re welding a new bolt into the opening. Or just drill a hole through the floor at that location and run a button-head bolt down through it with a nut on the underside to retain it. Make it as long (or as short) as you want it. |
IronHillRestorations |
Jun 24 2021, 06:46 AM
Post
#3
|
I. I. R. C. Group: Members Posts: 6,729 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None |
I was considering using a cut off wheel on the top and re welding a new bolt into the opening. Or just drill a hole through the floor at that location and run a button-head bolt down through it with a nut on the underside to retain it. Make it as long (or as short) as you want it. Exactly what I’d do too. Good advice! |
Lo-Fi Version | Time is now: 7th June 2024 - 11:59 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |