914 LS Boxster Pics/Info Options

[Gearup]

Good afternoon,
Was wondering if I could get info and pictures on peoples setups with their boxster s transmissions with the LS motor. Did you use the stock 6 speed Boxster shifter and cables. If so, did you created a pedestal to raise its height (Pics please). If not, what shifter did you use? Did you use a stock pedal cluster? Is there an aftermarket pedal cluster that could be set up for a hydraulic clutch and throttle cable that you have used? I have most everything but the tranny Mount and engine Mount bar. Any input and pics are appreciated.


Brett

[partwerks]

I used the stock pedal, and made a bracket for the slave cylinder.
Used the stock shifter, but put some goodies in it from fuction first.
Mechanic put it up on stilts. Would rather it was sitting back a bit further, but can't shrink the cables.
On the foot feed, I used part of the new, and part of the old system. Used the old pedal with linkage that hooked up to the DBW that was mounted vertically on the front wall.