 fitting new blinker relay |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 63acornwall |
 Mar 22 2022, 06:13 AM
Post
#1
|
|
Member  Group: Members Posts: 53 Joined: 24-January 19 From: London , UK Member No.: 22,823 Region Association: None  |
I have a new blinker ( turn signal flasher ) relay to fit , old one fails to blink the dashboard indicator lamp .
My '75 car has an aftermarket fuse system fitted - see pic - assume I must remove this to get at the blinker relay - but not sure how - or where relay is located ??  |
   |
 
|
  |
Replies
| 63acornwall |
Mar 22 2022, 04:10 PM
Post
#2
|
|
Member Group: Members Posts: 53 Joined: 24-January 19 From: London , UK Member No.: 22,823 Region Association: None |
Ok , took out the 2 outer screws and managed to drop panel a couple of inches . There were 2 relays , one had tags matching up with a replacement that I bought from a 911 shop . It was velcro’d onto the panel . I removed battery ground lead , swapped relays , reconnected battery , relay tested out fine . The hardest part was to get the panel back in , hard to see where screws were mounted while laying on back with head tucked under steering wheel - but done . Thanks for advice , not covered by Haynes manual !!
|
|
|
|
Posts in this topic
63acornwall fitting new blinker relay Mar 22 2022, 06:13 AM
914Sixer What year car? Different locations. Seeing homem... Mar 22 2022, 06:20 AM
dhuckabay Where is the relay on a stock 74?
What year car?... Mar 22 2022, 10:48 AM Chris914n6 The two outer most screws release the panel. Then ... Mar 22 2022, 10:43 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 07:21 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.