 Why did my rockers break? 6 cylinder |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| David Stowers |
 May 16 2022, 09:32 AM
Post
#1
|
|
Member  Group: Members Posts: 99 Joined: 28-June 12 From: UK Member No.: 14,613 Region Association: None  |
Hi all,
All 3 exhaust rockers broke on one side (4,5,6) when I started my engine for the first rime after cam and rocker re grind. What’s the likely cause here folks? Thank you |
   |
 
|
  |
Replies
| r_towle |
May 16 2022, 06:07 PM
Post
#2
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
The valve hit the piston.
Either valve timing or clearance. You will need to pull the heads and inspect piston tops and see if any valves are bent. So sorry about this, but hopefully you find some way to smile about this some day in the future. |
|
|
|
Posts in this topic
David Stowers Why did my rockers break? 6 cylinder May 16 2022, 09:32 AM
Superhawk996 Lots of possibilities. None of them good.
I... May 16 2022, 09:38 AM
David Stowers
Lots of possibilities. None of them good.
I... May 16 2022, 09:42 AM nditiz1 At what point did they break?
Did the cam timing ... May 16 2022, 10:02 AM brant I've been told in the past that some year of T... May 16 2022, 10:52 AM porschetub
I've been told in the past that some year of ... May 16 2022, 07:03 PM rgalla9146 :agree: all of the above.
Consider yourself a... May 16 2022, 04:02 PM mb911 Ugh what a sick feeling. My guess is wrong cam tim... May 16 2022, 04:31 PM euro911
:agree: May 16 2022, 05:04 PM fixer34 Assuming the pistons hit the exhaust valves while ... May 16 2022, 05:44 PM sixnotfour Bad News, you bumped cast pistons.... May 16 2022, 09:07 PM mepstein cam timed 180 degrees out? It happens. May 16 2022, 09:19 PM sixnotfour
cam timed 180 degrees out? It happens.
:beer2: May 16 2022, 09:44 PM Retroracer Like @FIxer34 suggested, missing or sheared cam ... May 17 2022, 07:18 AM burton73 Cam timing on my 6
This is not so easy and you ... May 17 2022, 10:43 AM sixnotfour Many shops have the tools ,but have done 180 out a... May 17 2022, 08:15 PM Luke M Have you checked the valve to piston clearance ? T... May 18 2022, 08:13 AM ClayPerrine I have lots of experience with setting the cam tim... May 18 2022, 11:04 AM Jake Raby
I have lots of experience with setting the cam ti... May 18 2022, 08:01 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 05:52 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.