 reverse light switch connector |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| shuie |
 Oct 30 2013, 07:33 AM
Post
#1
|
|
Member  Group: Members Posts: 352 Joined: 17-May 04 From: baton rouge, la Member No.: 2,075  |
Does anyone sell or make the connectors for the reverse light switch on the trans. case? Are the pins for the switch a standard size? I thought I would be able to use some of the leftover pins from my engine wiring harness but those don't fit the switch. Whats the best way to do this? Do I need a different switch, cut up a donor harness?
TIA |
   |
 
|
  |
Replies
| mcbrems |
Aug 22 2022, 11:31 AM
Post
#2
|
|
Ferdinand's first was Electric! Group: Members Posts: 46 Joined: 26-April 10 From: North San Diego County, CA Member No.: 11,660 Region Association: Southern California |
Just discovered the female side of the bullet connector works great if you use a pair of needle nose pliers to compress it a little by rolling it in on itself a tiny bit. That way, it maintains some outward spring to hold it in the plug. You’ll need to remove the plastic insulator sheath. A dab of dielectric grease to keep the elements out, and you’re good to go!
Cheers! |
|
|
|
Posts in this topic
shuie reverse light switch connector Oct 30 2013, 07:33 AM
chads74 My car had connectors that looked like they were a... Oct 30 2013, 07:44 AM Dave_Darling I haven't tried it, but it sure looks like sta... Oct 30 2013, 08:58 AM
Cap'n Krusty
I haven't tried it, but it sure looks like st... Oct 30 2013, 09:05 AM Chris H.
I've seen them used, and I've tried to ... Aug 22 2022, 01:28 PM mskala
Does anyone sell or make the connectors for the r... Oct 30 2013, 09:25 AM stugray The bullet type crimp connectors work, but you hav... Oct 30 2013, 11:24 AM zambezi Shuie
I have a few of the solder on ends. The 356... Oct 30 2013, 12:14 PM shuie Awesome. Thanks! Oct 30 2013, 12:44 PM GregAmy I believe these will work:
https://belmetric.com/... Aug 22 2022, 12:40 PM 914e I think it is part number 99965210210 they solder ... Aug 22 2022, 03:46 PM Justinp71 I just bought some of the large yellow bullet conn... Aug 22 2022, 09:48 PM dr914@autoatlanta.com they are the old 356 type bullet connectors and ar... Aug 23 2022, 09:27 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 12th June 2024 - 06:03 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.