Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> I get a straggler spark to engine tin 74 2.0
scottsilvertt
post Sep 20 2022, 05:34 PM
Post #1


scottsilvertt
**

Group: Members
Posts: 66
Joined: 17-May 06
From: South East USA
Member No.: 6,019
Region Association: South East States



Hello, I get a straggler spark about every 15 seconds from the distributor cap to some engine tin.
The tin is pretty close. 3/4 inch or so.

Spark shown with a little lightning drawn on there.

Should I take out my distributor, with the gear shaft, rotate counter clock one notch?

Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Jett
post Sep 20 2022, 05:41 PM
Post #2


Senior Member
***

Group: Members
Posts: 1,641
Joined: 27-July 14
From: Seattle
Member No.: 17,686
Region Association: Pacific Northwest



QUOTE(scottsilvertt @ Sep 20 2022, 04:34 PM) *

Hello, I get a straggler spark about every 15 seconds from the distributor cap to some engine tin.
The tin is pretty close. 3/4 inch or so.

Spark shown with a little lightning drawn on there.

Should I take out my distributor, with the gear shaft, rotate counter clock one notch?

Attached Image

Change the cap and leads?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
porschetub
post Sep 20 2022, 06:35 PM
Post #3


Advanced Member
****

Group: Members
Posts: 4,706
Joined: 25-July 15
From: New Zealand
Member No.: 18,995
Region Association: None



QUOTE(Jett @ Sep 21 2022, 11:41 AM) *

QUOTE(scottsilvertt @ Sep 20 2022, 04:34 PM) *

Hello, I get a straggler spark about every 15 seconds from the distributor cap to some engine tin.
The tin is pretty close. 3/4 inch or so.

Spark shown with a little lightning drawn on there.

Should I take out my distributor, with the gear shaft, rotate counter clock one notch?

Attached Image

Change the cap and leads?

(IMG:style_emoticons/default/agree.gif) might pay to check the rotor as it will look crappy like the cap ,plugs etc so you are somewhat part of the way to doing an electrical ignition service.
Things that come to mind including stuff mentioned above are ,leads,cap,rotor,points/ condensor,plugs,and then check the wiring to coil and condensor etc,reset the timing after.
You have a high resistance on the lead shown as it is tracking to earth on the engine tin so most likely that lead is poo,you can still buy the Beru copper leads as you have now,but you can buy better ,good luck.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 11th June 2024 - 09:32 AM