 trans cover, is it on yet? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| doobie123 |
 Nov 28 2022, 12:51 PM
Post
#1
|
|
Member  Group: Members Posts: 86 Joined: 8-July 22 From: tucson Member No.: 26,683 Region Association: Southwest Region  |
hi, working on a 1975 914 1,8 5spd.
so; i'm replacing the rear cover for the transmission. its the cover that the speedo drive is located in. i have it on but, i can't seem to get it to go on all the way. it is setting about 1/8" from seating all thew. i don't want to tighten the nuts until i can find out if this is normal or is there something i've missed or have out of alingment. any suggestions would be great! thanks. ive enclosed a pic  |
   |
 
|
  |
Replies
| r_towle |
Dec 4 2022, 05:22 AM
Post
#2
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
I might suggest a dry fit with no gasket.
It should be flush when setting it on. Look for debris in captured hole the pins fit into. Ensure the pins fit easily in the holes. Then place gasket over pins to ensure gasket is the correct shape. Rich |
|
|
|
Posts in this topic
doobie123 trans cover Nov 28 2022, 12:51 PM
mepstein Nope. It has to completely close the gap. There... Nov 28 2022, 12:57 PM
doobie123
Nope. It has to completely close the gap. There... Dec 2 2022, 11:37 AM porschetub
Nope. It has to completely close the gap. There... Dec 2 2022, 08:06 PM rbzymek The reverse gear set (the loose bits) has a spacer... Dec 2 2022, 08:41 PM doobie123
The reverse gear set (the loose bits) has a space... Dec 3 2022, 09:53 AM doobie123
[quote name='rbzymek' post='3042586' date='Dec 2 ... Dec 3 2022, 01:28 PM doobie123
[quote name='doobie123' post='3042708' date='Dec ... Dec 3 2022, 01:29 PM doobie123 thanks for all the comments so far.
here is what ... Dec 5 2022, 09:49 AM ejm Looks like the bushing from the old cover is stuck... Dec 5 2022, 12:06 PM mb911 The RTV pictured is frowned upon. The gasket helps... Dec 5 2022, 12:43 PM Dave_Darling The pinion depth is set by the gaskets between the... Dec 6 2022, 04:20 AM brant was the old cover with the hole in it... caused b... Dec 6 2022, 10:54 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:39 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.