headlight relay question, new PN, different connections? Options

[anderssj]

Hi all,

I was able to fix the old headlight relay (contacts were pitted), but picked up a new one just in case . . .

The new part has a slightly different PN (no "A")--the old "583A" is no longer available.

The new relay also has an additional contact ("30"), with the other 4 now labeled "56," "56a," "56b," and "S" (what happend to the "F"?).

Tried installing the new relay after looking at various diagrams--lights would come on (low), but not switch to high beam. Seems as if there needs to be a connection made to the new terminal ("30")--perhaps a "jumper" to ground, or one of the other terminals?

Any advice/BTDT would be appreciated--I don't want to let any of the "magic smoke" out of the relay (who ever posted that really helped me figure out how this electrical stuff works (IMG:style_emoticons/default/biggrin.gif) ).

Thanks!

Steve A-

[JWest]

The 4 headlight wires are to the left front of the fuse box. They are split at the fuse box, fuses 1&2 high beam, fuses 3&4 low beam. 2 inputs, 4 outputs.

You should see a white wire exiting the front of fuse 1 and another white wire on fuse 2, then a yellow wire on fuse 3 and another yellow on fuse 4. If these are white, yellow, white, yellow, you have found the issue.

If this is ok, check the headlight bulb connection. Brown (ground) is to the left, yellow (low) is on top, and white (high) is to the right.