 pressing in the front wheel bearings, what do I use, what do I grease? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914 RZ-1 |
 Feb 15 2023, 09:36 PM
Post
#1
|
|
Porsche Padawan  Group: Members Posts: 684 Joined: 17-December 14 From: Santa Clarita, CA Member No.: 18,230 Region Association: Southern California  |
1. I need to press in the front wheel bearings. Can I just use a big socket and tap/hit them in? Is there a better way? I do not have a press.
2. What do I grease? I'm assuming a pack it in the bearings, but do I put grease anywhere else? Do I pack these before or after I press them in?   Thanks! -Jeff --------- |
   |
 
|
  |
Replies
| infraredcalvin |
Feb 16 2023, 04:52 PM
Post
#2
|
|
Distracted Member Group: Members Posts: 1,641 Joined: 25-August 08 From: Ladera Ranch, CA Member No.: 9,463 Region Association: Southern California 
|
Nobody freezes these anymore? Prep the bearing and put it in the freezer for a few days, take it out and quickly insert it into the rotor/hub. Tap in with socket or old race, etc. it will go in pretty easily.
Warm up the rotor hub a bit to make it easer but once the cold bearing hits the warm rotor it’ll start expanding quickly. |
|
|
|
Posts in this topic
914 RZ-1 pressing in the front wheel bearings Feb 15 2023, 09:36 PM
technicalninja I'd scotch brite the new bearing bores and ins... Feb 15 2023, 09:58 PM iankarr Hope this helps...
https://www.youtube.com/watch?... Feb 16 2023, 12:07 AM
914 RZ-1
Hope this helps...
https://www.youtube.com/watch... Feb 16 2023, 11:00 PM scott_in_nh The tool is obviously the best way, but if you use... Feb 16 2023, 09:02 AM technicalninja
The tool is obviously the best way, but if you us... Feb 16 2023, 09:19 AM BK911 Bearing races can be "pressed" in using ... Feb 16 2023, 09:53 AM mgphoto You will need to press the grease into the bearing... Feb 16 2023, 11:37 AM 930cabman
You will need to press the grease into the bearin... Feb 16 2023, 11:47 AM mgphoto
You will need to press the grease into the beari... Feb 16 2023, 01:50 PM 914 RZ-1
You will need to press the grease into the bearin... Feb 16 2023, 10:41 PM mgphoto
[quote name='mgphoto' post='3058525' date='Feb 16... Feb 17 2023, 06:23 PM Van B
Nobody freezes these anymore? Prep the bearing a... Feb 16 2023, 10:58 PM 930cabman
Nobody freezes these anymore? Prep the bearing ... Feb 17 2023, 06:02 AM 914 RZ-1 I removed the old ones from the late rotor, cut th... Feb 17 2023, 05:40 PM 76-914
I removed the old ones from the late rotor, cut t... Feb 17 2023, 10:30 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2025 - 02:41 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.