need some help with floor plan fix, peeling the coating, POR15, etc Options

[914 RZ-1]

The M/C leaked all over the floor plan. There's some rust as well. Before I put back everything I thought I would clean it all up.

1. What is the best way to get all the coating off the floor pan? It looks like some sort of asphalt/tar paper. It seems to be peeling off okay with a putty knife. I'm guessing I use some sort of solvent to get the remaining gunk off? Heat gun?

2. I have a kit that has cleaner/degreaser, metal prep and POR15. I also want to reseal around whatever that is (plug?) in the middle with some seam sealer. What order is this all applied?
-cleaner
-prep
-POR15
-seam sealer

OR
-cleaner
-prep
-seam sealer
-POR15

Or some other order?

3. I was going to leave the POR15 as the final coat, but do I need to paint over it? The car is silver/gray, the POR15 is gloss black. It's under the carpet and under the floor mat, so it will not show. I'm more concerned with keeping the rust at bay.

4. Where should I stop the painting? At a seal? At one of the changes in contour of the floor pan? Please note that the car was in an accident many years ago (before my ownership) and was repaired, but the floor pan is still a little uneven. My concern is that the paint will wick under the tar paper, but is that even an issue?

Here's a photo, since I know we all like pictures. There is a pile of tar paper on the left:


Thanks!
-Jeff
------------

[914 RZ-1]

Thanks for the help!

I was able to find more threads on tar board removal, especially since I was searching for "tar paper "and "floor board" and not "tar board".

Seam sealer will go on AFTER POR15.

This is all surface rust, so no floor pan removal.

I plan on wearing a respirator and having a fan on and the garage door open. The car is on jackstands, so moving it out is not an option. I will scuff the surface for paint. What paint? I just need something to cover it. I was thinking gray paint that I could brush on. Thoughts?

Can anyone answer my last question: Where should I stop the painting? At a seal? At one of the changes in contour of the floor pan? Please note that the car was in an accident many years ago (before my ownership) and was repaired, but the floor pan is still a little uneven. My concern is that the paint will wick under the tar paper, but is that even an issue?

I'm thinking I can use seam sealer where the tar board ends. Seems the paint is basically glue, so maybe if it does wick under the tar board, it will harden anyway.