2,0 starting problems. Options

[Lars OLesen]

Hello you all

Thanks for a great and informative forum (IMG:style_emoticons/default/smile.gif)

Sorry for my poor american, I´m danish.

I have a 74 2,0 which can not start. Prior to this it only startet on 2 cylinders and after a 5 min. warm up it ran on all 4 , but often with a lot of hick ups.
I pulled the distributor, cleaned the trigger points which look fine, fixed the ignition advancing which was stuck. cleaned everything and lubed the moving parts. I found out that one of the connections in the 3 legged connection for the trigger points was not pushed all the way in, hope this will cure the starting on 2 cyl. and hick up problem.

But now it will not start. I´ve checked everything multible times and found out it is lack of fuel to the injectors. Only the start up injector works.

Any ideas about what I fucked up?

Any help will be appreciated (IMG:style_emoticons/default/smile.gif)

Regards Lars

[r_towle]

And,
New fuel lines, fuel filter, verify no leaks in the engine bay and underneath the tank. Replace all of them.

[Lars OLesen]

And,
New fuel lines, fuel filter, verify no leaks in the engine bay and underneath the tank. Replace all of them.

Thanks for replying

I hope to find a set of trigger points to keep it original, but 123 ignition is def a possibility
I have fuel pressure, but no fuel out of the injectors.