2,0 starting problems. Options

[Lars OLesen]

Hello you all

Thanks for a great and informative forum (IMG:style_emoticons/default/smile.gif)

Sorry for my poor american, I´m danish.

I have a 74 2,0 which can not start. Prior to this it only startet on 2 cylinders and after a 5 min. warm up it ran on all 4 , but often with a lot of hick ups.
I pulled the distributor, cleaned the trigger points which look fine, fixed the ignition advancing which was stuck. cleaned everything and lubed the moving parts. I found out that one of the connections in the 3 legged connection for the trigger points was not pushed all the way in, hope this will cure the starting on 2 cyl. and hick up problem.

But now it will not start. I´ve checked everything multible times and found out it is lack of fuel to the injectors. Only the start up injector works.

Any ideas about what I fucked up?

Any help will be appreciated (IMG:style_emoticons/default/smile.gif)

Regards Lars

[Lars OLesen]

Thanks for all your input..

Problem solved for now, found an old distributor in a box in the back of the workshop with trigger points mounted. I put the old greasy trigger set in distributor, and the motor starts (IMG:style_emoticons/default/piratenanner.gif) (IMG:style_emoticons/default/piratenanner.gif)

Now I can go hunting the 14-1500rpm idle and very rich idle,

Have a great sunday..