fuel tank pads, placement? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
fuel tank pads, placement? |
Bruce Hinds |
Apr 28 2023, 01:46 PM
Post
#1
|
V-8 madness Group: Members Posts: 733 Joined: 27-December 06 From: Port Orchard, WA Member No.: 7,391 Region Association: Pacific Northwest |
Where do the tree pads go that the fuel tank sits on? I know of two, the one in front of or above the driver's feet (aft left bottom) and the opposite side but forward on the divider between the fuel tank compartment and the front trunk. But where does the third one go? When I removed the tank I just found it loose . . .
Also, has anyone used rubber rather than the felt pads which seem to hold moisture? The old ones are pretty nasty and were causing some rust. |
914sgofast2 |
Apr 28 2023, 03:42 PM
Post
#2
|
Senior Member Group: Members Posts: 620 Joined: 10-May 13 From: El Dorado Hills, CA Member No.: 15,855 Region Association: None |
I caution you not to use felt or any other material that holds water or moisture as padding, or you will have your gas tank rusting from the outside to the inside where it rests on the felt or fiber pads. Use a rubber pad that won't retain water or moisture. Grainger sells self adhesive EPPM rubber sheets that you can cut into the right size and shape. I think it's either 1/8" or 3/16" thick and self adhesive on one side. I bought some a few years ago when I discovered that my gas tank had rusted on the outside where it rested against the factory felt padding, and was weeping just enough gas to create a big gas smell in the passenger cabin.
|
porschetub |
Apr 29 2023, 05:38 PM
Post
#3
|
Advanced Member Group: Members Posts: 4,703 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
I caution you not to use felt or any other material that holds water or moisture as padding, or you will have your gas tank rusting from the outside to the inside where it rests on the felt or fiber pads. Use a rubber pad that won't retain water or moisture. Grainger sells self adhesive EPPM rubber sheets that you can cut into the right size and shape. I think it's either 1/8" or 3/16" thick and self adhesive on one side. I bought some a few years ago when I discovered that my gas tank had rusted on the outside where it rested against the factory felt padding, and was weeping just enough gas to create a big gas smell in the passenger cabin. Well said,looks like Mark @ "the house of rubber" (lol) is on to it as we speak. I did mine with self adhesive closed cell refrigeration rubber insulation, easy . My tank is pristine inside so no point in not doing it really,who wants leaks from outside rust !!!. Cheers. |
Lo-Fi Version | Time is now: 1st June 2024 - 08:37 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |