 3.2l conversion died on a ride, appears I have an electrical problem, success! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jim912928 |
 Sep 10 2023, 01:39 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,487 Joined: 8-January 04 From: Granger, IN Member No.: 1,536 Region Association: Upper MidWest  |
Took out the 914 and it just stopped cold during the drive. It appears the fuel pump is not running. I did tow it back and ran some rudimentary electrical tests (I'm not good at wiring). I get no power to the fuel pump. I then pulled the dme relay and I do get 12v on 30, 12v on 86, no voltage on 87 or 87b.
This is an 84 3.2l thoughts? |
   |
 
|
  |
Replies
| jim912928 |
Oct 9 2023, 03:48 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,487 Joined: 8-January 04 From: Granger, IN Member No.: 1,536 Region Association: Upper MidWest |
Success! I replaced both reference sensors and it fired up immediately. Also got a new dme relay…old one still worked so I’ll use the old one as a spare. These were a pain to replace. One was frozen in (speed) so I had to remove the entire assembly and re-gap. Also tight on top to get everything unplugged, had to remove heater blower etc. in all, it took me about 8 hours from start to finish.
Just got back from a long spirited drive! Thanks all for your help! |
|
|
|
Posts in this topic
jim912928 3.2l conversion died on a ride Sep 10 2023, 01:39 PM
worn
Took out the 914 and it just stopped cold during ... Sep 10 2023, 05:14 PM
porschetub
Took out the 914 and it just stopped cold during... Sep 11 2023, 10:59 PM r_towle Two things I did after towing home my 84 911
I bou... Sep 10 2023, 07:24 PM jim912928 Thanks all….looked up the relay pinouts and will... Sep 11 2023, 11:38 AM SirAndy +1 for the DME relay.
I always carry a spare wit... Sep 11 2023, 11:47 AM ClayPerrine DME relays have suckdilliuckucked since their inve... Sep 11 2023, 12:59 PM worn
DME relays have suckdilliuckucked since their inv... Sep 11 2023, 05:56 PM Steve I read there are two sensors on the flywheel. One... Sep 11 2023, 09:09 PM davehg
I read there are two sensors on the flywheel. On... Sep 11 2023, 10:56 PM ClayPerrine For those of you that want to get rid of the probl... Sep 12 2023, 07:10 AM Justinp71 Why I stick with carbs... :). No in all seriousnes... Sep 12 2023, 08:04 AM Steve
Why I stick with carbs... :). No in all seriousne... Sep 12 2023, 08:23 AM ConeDodger
Why I stick with carbs... :). No in all seriousne... Oct 10 2023, 10:31 AM jim912928 Ok, I jumpered 30 (always hot), to 87 and 87b and ... Sep 12 2023, 04:33 PM arbitrary
Ok, I jumpered 30 (always hot), to 87 and 87b and... Sep 12 2023, 08:25 PM r_towle
Ok, I jumpered 30 (always hot), to 87 and 87b an... Sep 12 2023, 09:16 PM ClayPerrine
[quote name='arbitrary' post='3101554' date='Sep ... Sep 14 2023, 05:42 AM jim912928 Thanks Clay for the diagrams. Sep 12 2023, 04:54 PM jim912928 I was testing if my fuel pump was any good (only 2... Sep 12 2023, 09:52 PM Steve
I was testing if my fuel pump was any good (only ... Sep 13 2023, 09:04 AM Root_Werks Would think if you could do the "Y" jump... Sep 13 2023, 08:38 AM jim912928 Root…when I did the Y jumper the fuel pump did r... Sep 13 2023, 04:32 PM jim912928 Finally got back to this. Found reference video o... Sep 18 2023, 04:43 PM ClayPerrine
Finally got back to this. Found reference video ... Sep 18 2023, 05:25 PM jim912928 Thanks Clay! Sep 18 2023, 07:59 PM porschetub
Thanks Clay!
:agree: I had the speed sensor... Sep 19 2023, 07:22 PM porschetub Sorry 2 x post Sep 20 2023, 01:37 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 03:26 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.