 Idle issues, anyone want to take a stab?, sound up |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| nivekdodge |
 Oct 26 2023, 09:36 AM
Post
#1
|
|
Member  Group: Members Posts: 250 Joined: 28-August 21 From: Pittsburgh Pa Member No.: 25,860 Region Association: MidAtlantic Region 
 |
https://www.youtube.com/shorts/P82FcOy9scY
914 with fresh 1.8 and 123 distributor. Idle jets were swapped around , no change. only seems to happen on #4. Notice the pooof in the barrel when it pops? Kevin |
   |
 
|
  |
Replies
| rhodyguy |
Oct 26 2023, 10:53 AM
Post
#2
|
|
Chimp Sanctuary NW. Check it out. Group: Members Posts: 22,084 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch |
Use 1 idle speed adj screw to raise the idle a bit and remeasure the flow across all 4 Venturi. The other ISAS should be off the stop. Then report back with #s. At what rpm does the ‘sneeze’ cease?. What rpm is your idle set at?
|
|
|
|
| nivekdodge |
Oct 26 2023, 06:00 PM
Post
#3
|
|
Member Group: Members Posts: 250 Joined: 28-August 21 From: Pittsburgh Pa Member No.: 25,860 Region Association: MidAtlantic Region
|
QUOTE(rhodyguy @ Oct 26 2023, 12:53 PM)  Use 1 idle speed adj screw to raise the idle a bit and remeasure the flow across all 4 Venturi. The other ISAS should be off the stop. Then report back with #s. At what rpm does the ‘sneeze’ cease?. What rpm is your idle set at? idle around 900 airflow at 6 Kevin |
|
|
|
Posts in this topic
nivekdodge Idle issues, anyone want to take a stab? Oct 26 2023, 09:36 AM
Superhawk996 Timing and/or valve adjustment Oct 26 2023, 10:24 AM
brant I also have seen this if that cylinder is down on ... Oct 26 2023, 03:42 PM nivekdodge
I also have seen this if that cylinder is down on... Oct 26 2023, 05:59 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 07:25 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.